View Full Version : Darth Mom's Saber
Legume
07-14-2017, 12:58 PM
I made my first saber! It's a little 8" single-hand stunt saber with the MHS Style 3 Choke inspired by Jenny's Sorrow lightsaber. The blade itself is around 30" and I've got 10 inches of blade that was chopped off that I need to get a tip for so I can swap the blade out to fit my youngest as necessary. :)
1568415685
The padawans completely flipped out with excitement and I was promptly asked if I was going to be Darth Mom....
15686
So... yes. Yes I am.
15687
Therion Jinn
07-14-2017, 06:39 PM
I like it. That last bit is right to the point, too
Tom Tilmon
07-14-2017, 09:54 PM
awesome saber, awesome build, awesome mom! lets see the guts!!!!!!
Jenny
07-15-2017, 04:27 AM
Schweet! I'm quite taken with it. Where did you end up putting the switch?
ZrenTobas87
07-15-2017, 10:26 AM
I like the design. Nice and sleek yet deadly looking at the same time :P I need to do me a couple new builds already
Jenny
07-15-2017, 08:32 PM
15685
Heh. I just realized... you're a quilter!
Legume
07-16-2017, 02:18 PM
The switch is in the pommel (Style 1 for the guarded switch) and there's actually enough room in there that I could have used the V3 heat sink instead of the flat V4 if I'd known I'd have the space.
I'm a costumer, actually! Quilting is not my forte but the big ruler is really useful in clothing construction too. I'm working on drafting Brienne's pink bear-mauling dress from Game of Thrones at the moment then I've got the kids Halloween costumes to start next week. My eldest is going to be a padawan and my youngest Princess Leia. I'm obviously going Sith, and hubs hasn't decided yet.
Guts:
Super basic with a Guarded switch, 1.2ohm 3w resistor (probably? I ordered a few and had to try to decipher the marking lines to figure out which was which), the Cree Star led Module (v4 heatsink), and the 18650 3.7v battery.
15690
I might go in and shorten the blue and white wires still. They fit inside because I did have that bit of extra space but they're longer than necessary.
Jenny
07-17-2017, 04:31 PM
It's a shame you don't live closer... I think you and I could be friends. 8)
rlobrecht
07-18-2017, 10:24 AM
Nice and clean. I like it.
Schuyler Bain
07-28-2017, 01:08 PM
Looks awesome Legume (a.k.a. Darth Mom)! I don't think the kids and I could talk my wife into that moniker.
I was playing around with a similar design myself, but using blade holder style 6 and a larger extention so I can try to add sound, but seeing yours together as a stunt it looks really sharp.
15723
rlobrecht
07-28-2017, 01:18 PM
Looks awesome Legume (a.k.a. Darth Mom)! I don't think the kids and I could talk my wife into that moniker.
My wife has a t-shirt that says something like "I'm a Jedi mom, don't make me flip the Sith switch".
Legume
07-29-2017, 07:28 PM
I was playing around with a similar design myself, but using blade holder style 6 and a larger extention so I can try to add sound, but seeing yours together as a stunt it looks really sharp.
15723
Thank you! If I made any alterations, I'd prioritize squeezing a recharge port into it. I dislike having to unscrew it to get the battery out, and it's hard on the wiring. It's probably my novice soldering job speaking but I've already had to resolder a couple points that were too stressed by the basic act of getting the battery out.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.