Speaker installation question.

[Jediseth]

Can I glue a speaker to my aluminum tubing? I'm struggling trying to find a solution I could glue a speaker holder to the aluminum. I would like to use threaded rods to hold it, but I just don't have a way to do it with all my electronics inside. Plus the rods won't fit through mi ID. Any suggestions?

http://i632.photobucket.com/albums/uu46/rockblade19/IMG_0870_zpshahhrpeg.jpg (http://s632.photobucket.com/user/rockblade19/media/IMG_0870_zpshahhrpeg.jpg.html)

[jbkuma]

In short, yes. With the base speaker be careful, the back is open to the diaphragm. Alternatively a 3D printed part could hold onto the magnet from.

[Jediseth]

Thank you, so would it be safer to use the premium speaker. What type of 3-D part do you mean?
" Hold onto the magnet from" I'm not sure what you mean.

[jbkuma]

It would be easier to not mess it up, since it's sealed.

You'd need something that can grab it from behind, since the magnet hangs off the back, a 3D part could be designed to hold onto the magnet instead of the rim of the speaker.