Nano Biscotte V4 ISSUES!!!!

[jedikirk]

Hello forum, so i just finished wiring my first V4 and have a slight issue....

Set up is a NBV4, 18750 Battery, tri cree BBW, recharge port.. 24mm bass speaker...

The issue is that when I try to switch fonts.. I hold the button to change font.. and it does the beep, but then the saber light turns on by it self without pressing the activation button,... but no sound....then i hold the button to turn it off, and it does the deactivation sound... very odd.. Has anyone one else had this issue???

I wired everything like i did with my NBV3's

[ColdVizjerei]

Sounds like you activated mute on the go.

The NBV4 now has that feature so if you hold the button a little longer past the initial beep, it should beep again with a different tone, and then go to the next font.

As always, check the manual and it should have all the detailed info!

[jedikirk]

Sounds like you activated mute on the go.

The NBV4 now has that feature so if you hold the button a little longer past the initial beep, it should beep again with a different tone, and then go to the next font.

As always, check the manual and it should have all the detailed info!

YUP!!! that is what was going on thanks!!!