PDA

View Full Version : Nano Biscotte V3 Sound Font help



Pyron
05-26-2017, 12:49 PM
Hi there,

I just built my new lightsaber with a Nano Biscotte V3 inside. Then i went on Soundfont.com and bought the VadeR1 Sound Font. I renamed all the files to the name they should have for the Nano Biscotte. Then i booted up my saber and changed to my new font. The Poweron sound works fine but as soon as the hum begins to play my saber just plays random sound. For example: hum begins -> random swing sound (without moving the saber) -> random clash sound -> random poweroff sound.

I really don't know what to do now :(. I hope someone can help me.

rlobrecht
05-26-2017, 01:06 PM
Sounds like you didn't do a full format before copying the new sound font over.

Pyron
05-26-2017, 01:52 PM
Sounds like you didn't do a full format before copying the new sound font over.

Ok i did that and the first time it worked. Then i formated it again and tried to run a mix of 2 different sound fonts and got the same problem :/

Jay-gon Jinn
05-26-2017, 04:56 PM
Fyi, you do not need to rename the files specifically for the nb, it will ignore anything else that the pc or cf will use.

Warlock
05-26-2017, 05:01 PM
As Jay Gon said you do not need to rename files so I'd reformat and load the font as it is from the site and try again.