Rampant
04-11-2017, 06:19 PM
Sorry for the noob question, but I wanted to confirm the specs of the Tri-Cree cyan/cyan/white.
http://www.thecustomsabershop.com/Luxeon-Tri-Rebel-Star-P777.aspx
I assume these are the same as the single brethren, yes?
http://www.thecustomsabershop.com/Luxeon-Rebel-Star-P523.aspx
So, I would use these parameters for the resisters, yes?
CYAN
Battery Voltage: 4 (rounded from 3.7)
Max Current: 1
Forward Voltage at Max: 3.4
WHITE
Battery Voltage: 4 (rounded from 3.7)
Max Current: 1
Forward Voltage at Max: 3.1
This would put the resisters and 0.5 Ohm and 1 Ohm respectively (from the shop).
Just had to confirm I was reading that correctly and that the Tri-Cree is just three singles mounted to the same disc.
Thanks in advance.
http://www.thecustomsabershop.com/Luxeon-Tri-Rebel-Star-P777.aspx
I assume these are the same as the single brethren, yes?
http://www.thecustomsabershop.com/Luxeon-Rebel-Star-P523.aspx
So, I would use these parameters for the resisters, yes?
CYAN
Battery Voltage: 4 (rounded from 3.7)
Max Current: 1
Forward Voltage at Max: 3.4
WHITE
Battery Voltage: 4 (rounded from 3.7)
Max Current: 1
Forward Voltage at Max: 3.1
This would put the resisters and 0.5 Ohm and 1 Ohm respectively (from the shop).
Just had to confirm I was reading that correctly and that the Tri-Cree is just three singles mounted to the same disc.
Thanks in advance.