PDA

View Full Version : Main LED not lighting up


Scraftypants
10-18-2016, 04:39 PM
So I've gotten everything to function on my CF v.8, but the main LED will not light up at all, No "magic smoke" from the board, no bridging, the led is a blue Rebel Star, Got ahold of the shop and was told to check the settings on my micro sd which I will have to wait on for the time being. Wondering if anyone has any other advice on the matter.
Forgetful Jedi Knight
10-18-2016, 04:44 PM
It's the LED settings in the override.txt file. Change or remove them.
Scraftypants
10-18-2016, 05:16 PM
Thank you, I will give it a try.
Scraftypants
10-19-2016, 08:01 PM
It's the LED settings in the override.txt file. Change or remove them.



Nevermind, I got it running, I actually found one of your old posts with a guy having the same issue :p
Kal Joren
12-24-2016, 11:50 AM
Care to share that link?

I am having a similar issue, but not having any luck. If I remove my FoC wiring, I get no main blade color. However, with my FoC wiring in place, my FoC die is lit as main blade, but main color is acting as FoC.

http://forums.thecustomsabershop.com/showthread.php?20924-Main-blade-color-and-FoC-swapped-on-CF-8-build