winovino
09-11-2016, 07:56 AM
Hi all, let me start by stating i'm a first time saber builder.
I have purchased most everything i need and am in the process of final design.
My question is about the resistor requirements for foc using onboard Pex.
I have a pack of 7.4v Li-ion 1050mAh 14650 batteries
a cf8
a blue/royal blue/ white tri-cree (white for foc @ Forward Voltage @1000mA = 3.15v)
I'm not sure that my understanding of the manual is correct. From page 39/40 i believe i need a 4.7ohm, 4.7w resistor for foc.
Does this sound correct? What will my battery life be expected to be?
Any and all info is appreciated!
thanks,
I have purchased most everything i need and am in the process of final design.
My question is about the resistor requirements for foc using onboard Pex.
I have a pack of 7.4v Li-ion 1050mAh 14650 batteries
a cf8
a blue/royal blue/ white tri-cree (white for foc @ Forward Voltage @1000mA = 3.15v)
I'm not sure that my understanding of the manual is correct. From page 39/40 i believe i need a 4.7ohm, 4.7w resistor for foc.
Does this sound correct? What will my battery life be expected to be?
Any and all info is appreciated!
thanks,