PDA

View Full Version : MR Anakin conversion kit



Anakin_Skywalker
02-07-2007, 06:16 PM
What does the MR Anakin conversion kit include? It doesn't tell me what does it come with on the website.

xwingband
02-07-2007, 06:22 PM
It comes with the holder itself, the heatsink, bolts to hold it on, screws to hold down the LED, allen wrenches for both of the previous, and screws for reattaching the MR parts (if needed).

Like the description says: "LED, lens, and lens holder are sold seperately." You have choices there so the decision is up to you. Also to make the look complete you should buy the short graflex/anakin pins.

Strydur
02-07-2007, 09:15 PM
I thought a picture said a thousand words. :P

http://www.thecustomsabershop.com/images/PRODUCT/medium/750.jpg

james3
02-08-2007, 07:30 AM
http://www.gaownersclub.com/forum/images/smilies/icon_roflmfao.gif

Yep.

MasterStoney
02-08-2007, 10:53 AM
nope, only says 999

Firebird21
02-08-2007, 11:00 AM
nope, only says 999


And what are they?

:mrgreen:

Marsupial
02-08-2007, 12:40 PM
Bolt, Bolt, Bolt, Bolt, Bolt, Bolt, thumbscrew, washer, washer, bolt, bolt, allen key, allen key, heatsink, blade holder.

Well, not 999, but close.

Lord Maul
02-08-2007, 03:31 PM
tim, what's the nylon washer for??? :?:
i never put it on cause i didn't know where to put it :?

Strydur
02-08-2007, 04:38 PM
Which if any of the 3 washers you use depends on how your screws that hold the chrome bezels on protrude into the blade area. It doesnt really matter if you just dremel the part that sticks in though.

Anakin_Skywalker
02-09-2007, 06:04 PM
Does the Anakin Conversion kit include the heatsink that I show you?
Here the link to the heatsink https://www.thecustomsabershop.com/p-730-conversion-kit-led-holder.aspx

vortextwist
02-09-2007, 06:09 PM
it comes with everything listed above.

Anakin_Skywalker
02-09-2007, 06:10 PM
I will take that as a yes.Right.

vortextwist
02-09-2007, 06:35 PM
yup

Anakin_Skywalker
02-10-2007, 01:56 PM
Is one of the bolts use to hold down the blade in that kit?

Lord Maul
02-10-2007, 02:49 PM
the thumbscrew is used to hold in the blade. the four identical bolts hold on the heatsink, and the 2 nylon screws hold on the led

Anakin_Skywalker
02-13-2007, 05:01 PM
Do I have to buy the thumbscrews to hold down the blade or it already come with the kit?

vortextwist
02-13-2007, 05:54 PM
comes with it.

Lord Maul
02-13-2007, 08:02 PM
everything you need except the led, lens, lens holder, and solder w/ iron is included in the kit :wink: