Ryan528
07-14-2016, 09:51 PM
I'm trying to build my first saber and I want it to be an LED tonfa saber with sound but I'm not sure if I have all the parts I need or unnecessary parts. In addition to some of the parts I need being out of stock I'm not sure If the tonfa adapter goes on the end of the main body or somewhere else so I don't know if I need a second pommel or not. Please help me.
Here is the list of items I'm using:
Tonfa handle style 1
Tonfa pommel style 1
Tonfa MHS adapter
MHSV1 Blade Holder Style 17
MHS speaker and 4x AAA battery holder
Luxeon Rebel Star (Red)
Collimator Lens 8.7 deg viewing angle
18ohm 1/4w resistor
Hilt Style 1 (7" Double female threaded connector)
Star thermal tape pad - Single LED
SPST Momentary Guarded switch with red button
Li-Ion 18500 3.7V 1400mAh PCB Protected Rechargeable Battery Module
Heatsink module for 1" ID tubes
NB V3 MWS Header and Wiring Harness
Cree/Rebel Lens Holder
MPS Pommel style 4
MPS Clip
MPS Insert style 6
Here is the list of items I'm using:
Tonfa handle style 1
Tonfa pommel style 1
Tonfa MHS adapter
MHSV1 Blade Holder Style 17
MHS speaker and 4x AAA battery holder
Luxeon Rebel Star (Red)
Collimator Lens 8.7 deg viewing angle
18ohm 1/4w resistor
Hilt Style 1 (7" Double female threaded connector)
Star thermal tape pad - Single LED
SPST Momentary Guarded switch with red button
Li-Ion 18500 3.7V 1400mAh PCB Protected Rechargeable Battery Module
Heatsink module for 1" ID tubes
NB V3 MWS Header and Wiring Harness
Cree/Rebel Lens Holder
MPS Pommel style 4
MPS Clip
MPS Insert style 6