Correct battery for Tri-Rebel, NBv3 setup w/ charge port

[TheCheeker]

Hi,

I'd like to know what the best battery to use for a Tri-Rebel (RB,RB,W) LED, Nano Biscotte setup w/ a charge port. Ideally, I'd like to use something that will fit in the MHS speaker mount found here:

http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx

But obviously, if that won't work for what I need I won't use it.

Thanks!

[Silver Serpent]

The ideal battery solution for that setup is an 18650 li-ion cell. This: http://www.thecustomsabershop.com/18650-Single-Cell-Holder-P886.aspx is designed to fit in that speaker holder and hold your battery secure.

[TheCheeker]

And that battery holder is meant for this battery, correct?

http://www.thecustomsabershop.com/TrustFire-Protected-37V-2400mAh-18650-Lithium-Battery-2-pack-P517.aspx

[Silver Serpent]

That one will work.

[FenixFire]

And that battery holder is meant for this battery, correct?

http://www.thecustomsabershop.com/TrustFire-Protected-37V-2400mAh-18650-Lithium-Battery-2-pack-P517.aspx

When installing the battery after each charge make sure you do not reverse the polarity!