PDA

View Full Version : crystal focus v8 foc question



Darth Scorn
05-15-2016, 02:19 PM
Hopefully this hasn't already been covered but here goes, I wired up my CF8 (no Cex board) and using the on board Pex for Foc, well the main led driver is driving the Foc and the onboard Pex is driving the main LED, is this supposed to happen? Is there something I'm missing in the manual? I have checked my wiring multiple time's and everything looks great, I have also tried taking the Foc out completely and the main Led output is still only driving the Foc, thanks in advance for any help on this matter.

Forgetful Jedi Knight
05-16-2016, 08:28 AM
It sounds like you didn't plan your wiring out too well. The "good news" is it is all fixable by altering the configuration files, however, you WILL need to know which color you had attached to which channel (consult manual for the details on how to make the changes).

Darth Scorn
05-16-2016, 03:30 PM
Thank you

Bcarp100
05-20-2016, 01:03 AM
I am having he same issue. I am unsure how to fix it via the config file. Is there a simple explanation?

Forgetful Jedi Knight
05-20-2016, 07:12 AM
No, there isn't. It depends on which color you have wired to which "channel". Once you know which is which, The manual (pg. 26) goes through each of the settings. Also make sure you got through the override.txt file in the root directory and make sure there is nothing set there that may override what you have set up elsewhere.

Bcarp100
05-21-2016, 11:19 AM
Awesome I got it all figured out thank you!!!