PDA

View Full Version : Flame On !!! / Store stock question



Pages : [1] 2 3

Tenric Starkindler
01-30-2007, 09:40 PM
OK.
I looked around for an answer and didn't see it (though I seem to recall reading about it) SO
I put on my flame retardant long johns to post this question..... :oops: :lol:

I see many of the pommels and some of the emitters not in stock.
do we know when they will be back in stock?

Do-Clo
01-31-2007, 01:19 AM
Tenric there used to be a machined center conector for two sink tubes but I no longer see it in the store. PM Tim to see if he has any or could make you one.

darthdan
01-31-2007, 01:42 AM
I think this is in response to my post...?

Strydur
01-31-2007, 09:37 AM
The only emitter currently out of stock is the style 7. These will be restocked within a month or so with a regular version and one with slots.

The only pommels that are in stock are 3 and 5. The rest will be handled via the modular pommel system which should all be ready by the end of the first quarter.

Tenric Starkindler
01-31-2007, 03:53 PM
thank you Strydur.
(and set aside one of the style 7 with slots !!! that sounds SWEET!!)

Ryma Mara
01-31-2007, 05:14 PM
If Iam thinking right the one hes talking about is think of blade holder 7 right now take the slots in blade holder 4 and put them on there.

A friend of mine came up with the idea, its looks sweet as hell.

How about a blade holder with exposed vertical grooving?

vortextwist
01-31-2007, 05:17 PM
good I wanted a blade holder 7 with slots. ryma sign into messenger

elrond.406
01-31-2007, 06:06 PM
The only emitter currently out of stock is the style 7. These will be restocked within a month or so with a regular version and one with slots.

The only pommels that are in stock are 3 and 5. The rest will be handled via the modular pommel system which should all be ready by the end of the first quarter.

:? What do you mean by "the end of the first quarter"?

Lord Maul
01-31-2007, 06:07 PM
the first quarter of the year

elrond.406
01-31-2007, 06:15 PM
So thats the end of Febuary?

xwingband
01-31-2007, 06:17 PM
How many months are in the year? What's one fourth of that?

vortextwist
01-31-2007, 06:18 PM
march

elrond.406
01-31-2007, 06:19 PM
Ummm...12? 12 divided by 4 is 3, sooo...oh! It's the end of March! :oops: sorry... :(

elrond.406
01-31-2007, 06:26 PM
So tim, when are the Double threaded hilt style 2 & 3 coming back? :wink:

LordArgyll
01-31-2007, 06:40 PM
Style 7 emitter with slots? Oh man... I would have loved to have one of those a month ago... :)

Tenric Starkindler
05-10-2007, 05:34 PM
The only emitter currently out of stock is the style 7. These will be restocked within a month or so with a regular version and one with slots.

The only pommels that are in stock are 3 and 5. The rest will be handled via the modular pommel system which should all be ready by the end of the first quarter.


??STyle 7 with SLOTS ??
itching to see them and then order one, plus some other stuff......got a design in my head......any ETA

*tenric crosses all his fingers, toes and eyes**

Ryma Mara
05-10-2007, 05:36 PM
I seen it its freaking sweet

Friend of mine still needs to get that part.

Strydur
05-10-2007, 08:54 PM
Well..at this point I have not ordered them as I got hit with so many other parts to get manufactured. But, I will have the normal style 7 back in stock soon and I could probably be talked into customizing one or two.

Tenric Starkindler
05-10-2007, 10:20 PM
Then I shall begin by saying...."Pretty please with sugar on top" (in my humblest, most sincere voice of course)

Shadow
05-16-2007, 08:41 AM
The only emitter currently out of stock is the style 7. These will be restocked within a month or so with a regular version and one with slots.

The only pommels that are in stock are 3 and 5. The rest will be handled via the modular pommel system which should all be ready by the end of the first quarter.

Style 7 with slots eh?

Don't suppose you've got a pic of that by any chance?

Barmic Rin
05-16-2007, 12:58 PM
Hmm...... I may be interested in a slotted one.....
Tim, i'll be doing a big order ( AT LEAST $400) over the next coupla days.
If anybody has a shot of a slotted one, can they post pics so I can contribute to Tims 'Diaper fund' for the new Youngling by bulking out my order!

scott5050
06-04-2007, 11:17 AM
I was about to place an order as well but all the LED bladeholders seem to be out of stock???

Are they actually gone or is this an error?

Hasid Lafre
06-04-2007, 11:26 AM
Could possably be an error. its happened as far as I know of once before.

Strydur
06-04-2007, 05:55 PM
Out of heatsinks for a couple days. They will be back by the end of the week.

vortextwist
06-05-2007, 01:15 PM
how long till the 10 degree lenses are back i stock?

Strydur
06-05-2007, 02:53 PM
They are..I had 115 but I forget to update inventory allot it seems.

Firebird21
06-05-2007, 03:01 PM
...I forget to update inventory allot it seems.






http://www.gaownersclub.com/forum/images/smilies/icon_nono.gif


:mrgreen:

vortextwist
06-05-2007, 03:05 PM
lol, k thanks

Tenric Starkindler
06-14-2007, 05:19 PM
The only emitter currently out of stock is the style 7. These will be restocked within a month or so with a regular version and one with slots.

The only pommels that are in stock are 3 and 5. The rest will be handled via the modular pommel system which should all be ready by the end of the first quarter.

8) :lol:
Slots
SLots
sLoTs
SLOtS
????????

ti-el_terall
07-15-2007, 03:47 PM
Any idea when the 4.8PackAAAShort will be back in stock?

Strydur
07-16-2007, 10:28 AM
Soon..I made up more long instead of shorts on accident. I will get some made this week.

Hasid Lafre
07-16-2007, 10:37 AM
Any news on k2 greens?

think we can get 1500ma k2 cyans?

ti-el_terall
07-17-2007, 01:56 PM
Sweet Tim, those are the last parts I need to finish my order! :D

Strydur
07-18-2007, 05:16 PM
Well the k2 cyan is brighter than the lux3 so it would be a good addition. I will see about adding those in. Of course cyan is always a pain do to the binning. Lets hope they just come out with all k2 in star format soon.

vortextwist
07-18-2007, 05:51 PM
Lets hope they just come out with all k2 in star format soon.

me to, I find it hard to solder to the k2's you have now.

Hasid Lafre
07-18-2007, 07:40 PM
:D :D :D :D

WOOHOO. that my friend is the last piece of the puzzel.

vortextwist
07-18-2007, 07:47 PM
:D :D :D :D

WOOHOO. that my friend is the last piece of the puzzel.

puzzle

Lord Maul
07-18-2007, 08:22 PM
Hey tim, when will you have more M/F sections in?

i need like a 1.5 inch one

Nightwing
07-19-2007, 04:06 PM
I'm wondering about the style 2, 4, and 6 emitters, as well as the MHS extension... they've been out of stock for awhile now....

Oh, and Strydur, I sentcha a PM about the MHS builder page not long ago; didn't know if you'd gotten it or not.

Strydur
07-20-2007, 03:29 PM
2 and 4 blade holders will be awhile yet. 6 is discontinued. A few new pommels and a blade holder are due any day now. 2" and 3" double females will be added soon. There will be a gender changer piece that changes a female to a male instead of stocking ones with a male on one end and a female on the other. These have had to be sent back 3 times so who knows when I am going to get them correctly made. The other 3 blade tips will be added soon and I have made the shoulders for the thin walled ones longer than normal as people requested.

Strydur
07-20-2007, 03:48 PM
Nightwing..the reason I have not done anything with the builder is I kind of screwed up the idea. With the MPS and with making gender changers I am going to have to totally rethink how to make a builder that will work correctly.

If nothing else I would like to eventually have all the pieces be viewable in 3d and do the same for assembled sabers..atleast the most common designs. There are tons of things I would love to do but never enough time to do a quarter of them.

goldsaberwarrior
07-20-2007, 03:59 PM
Time- the one thing that flys by fast and you never have enough of to do things with.
Money- the one thing you never have enough of when us saber builders want to build a saber or need a part. :)

Hasid Lafre
07-21-2007, 10:03 AM
Love the work tim.

Mesa happy for new tips.

Nightwing
07-22-2007, 03:34 PM
So... what about MHS extensions? I'll sorta need one at some point...

Hasid Lafre
07-22-2007, 05:46 PM
Well there are all sorts of extentions that are in stock.

Lord Maul
08-06-2007, 05:31 PM
Hey Tim, when will you have more MPS inserts ready?

Strydur
08-07-2007, 12:22 AM
Nothing is in the works at the moment.. feel free to post your ideas though

Hasid Lafre
08-07-2007, 07:10 AM
I was thinking of an insert that could also work to house the recharge port and still add some sort of vent for a speaker.

vortextwist
08-07-2007, 11:53 AM
how hard would it be to get aurabesh symbols on them?

Strydur
08-08-2007, 12:20 PM
I was thinking of an insert that could also work to house the recharge port and still add some sort of vent for a speaker.

Drill out the center hole on MPSI1.. it works fine.

Nightwing
08-14-2007, 05:26 PM
Drill out the center hole on MPSI1.. it works fine.
Sounds cool... but what about an MPS insert with either a built-in recharge port (it'd have to have no speaker slots, though. :() or a single slot where the recharge port could somehow "snap" in (or otherwise be somehow held inside the hole).

vortextwist
08-22-2007, 03:02 PM
when will the p.l.i.'s be back in stock?

goldsaberwarrior
08-22-2007, 11:42 PM
I would like to see something that will hold the drivers in place for us something like how the hasbros are held. Would cut down on the swing registering as a hit for us. Don't know how you would fix that up tim but would be nice.

LAN-ED-TUL
08-23-2007, 01:39 AM
for the ultrasound board it wont help. i had a cradle made for the hasbro board, and when i swapped boards the ultra board slipped right in there like the hasbro did. it dont move, and is suspended dead center of the hilt tube. its a trophy column i sanded down to fit snugly inside the heiland handle, and hollowed the inside of it out to fit the board in there.

mine still registers a swing as a hit alot. so a solid mounting inside doesnt help. its the sensor itself misregistering the swings as hits.

Strydur
08-23-2007, 09:12 AM
Pli's are on order..not sure when I am going to get them though.

I am working on a sound capsule for the MHS.

Hasid Lafre
08-23-2007, 09:14 AM
awsome

vortextwist
08-23-2007, 12:38 PM
oh that's gonna be sweet. I know it was talked about but someone mentioned a batt speaker holder, kind of like the mr's

Tenric Starkindler
08-23-2007, 07:04 PM
mine still registers a swing as a hit alot. so a solid mounting inside doesnt help. its the sensor itself misregistering the swings as hits.

might it possibly be either the sensitivity of the sensor (is it adjustable?) or the acceleration/deceleration factor (you swing to hard or start to fast?)

LAN-ED-TUL
08-23-2007, 08:45 PM
no, i can h9old it still, then slowly move it and i get a hit sound sometimes. i dont think you can adjust anything on the sensor, i dont think theres anything to do it with on the board.

its a nuisance, but with all the other cool stuff it does, i dont mind too much. maybe someone, will figure out how to compensate for it, but a solid mounting doesnt seem to help any. maybe Alex knows if there is a adjustment to sensitivity we could do to slow that or stop it from misregistering swings as hits. swinging slow, fast, it does it sometimes no matter how you do it.

Lord Maul
08-28-2007, 10:00 PM
well, i finally got off my lazy arse and drew something up for a pommel insert.

http://i112.photobucket.com/albums/n187/aluke_2006/MPSInsert1.jpg

i realize that there might be a bending issue do to the slots, but depending on the thickness of the metal, that could not matter.

Hasid Lafre
08-28-2007, 11:41 PM
Thanks for the new items tim, Thats bloomen awsome.

Hasid Lafre
08-29-2007, 12:29 PM
Hay tim FYI theres now 2 style 5 pommels.

Jay-gon Jinn
09-04-2007, 08:25 AM
I noticed today that all the LED blade holders are out of stock....any idea when they will be back in?

Strydur
09-04-2007, 03:00 PM
We are out of one of the kit components..They should be back in stock by the end of the week.

supertrogdor
09-04-2007, 03:01 PM
i was wondering that myself, thanks for the heads up Tim

ArkaiHalon
09-05-2007, 03:40 PM
is the 1.25 sink tube going to be offered soon?
I've checked 3 home depots, and 2 lowes, and none have it in 12 inch.

Strydur
09-05-2007, 09:19 PM
Not really soon. I have yet to place the order for them and it usually takes a couple of weeks to get them.

ArkaiHalon
09-05-2007, 09:30 PM
I can be patient, gotta save up for the rest of that order anyway.

GFORCE13
09-05-2007, 10:32 PM
YEAHHHHH!! Thanks Tim, I just noticed that the Style 7 MHS Emitters are back in stock, I will be ordering in the Am, since I am almost passing out on the keybord.: :wink:

ArkaiHalon
09-06-2007, 05:41 AM
We are out of one of the kit components..They should be back in stock by the end of the week.

ArkaiHalon
09-07-2007, 08:48 AM
Any idea when we'll see more of corbin's drivers available, preferably in momentary so that I can rig it to the hasbro i'm gonna scavenge?

vortextwist
09-08-2007, 11:03 AM
how about more lux III cyan bin 1's? 8)

TimeRender
09-10-2007, 09:32 PM
I don't want to harass you Tim but any ETA on those neck pieces? Just tell me they'll be available before Halloween and I'll be satisfied. :D

Strydur
09-10-2007, 11:59 PM
Not sure. They came in but where machined wrong and had to be sent back. Hopefully the next week or so.

TimeRender
09-11-2007, 07:45 AM
That's good enough for me. Thanks!

DACOTA
09-11-2007, 03:41 PM
So are you not going to sell anymore fx sabers Tim?

Hasid Lafre
09-11-2007, 03:43 PM
Well Mr went under so I imagen.

I thought I read somewhere a while back that he wont be buying anymore fx sabers and conversion kits unless asked or something like that.

xwingband
09-11-2007, 05:19 PM
MR isn't "going under"... they just won't be making SW stuff.

I believe Tim said if demand warranted it he'd keep making conversion kits.

DACOTA
09-12-2007, 07:27 AM
Ahh man I hope he doesnt get rid of those,I mean eventually you wont be able to find and buy fx sabers so yeah.but for now,woohoo.So I better go buy some up now. :wink: :D

ti-el_terall
09-13-2007, 05:29 PM
Any idea what the price point will be on the thin neck?

chaos
10-05-2007, 06:33 AM
When will the MR Anakin conversion kit be back in?

Strydur
10-05-2007, 08:37 AM
early next week

JediTom
10-05-2007, 02:29 PM
I just ordered the Obi Conversion from the shop.

vortextwist
10-19-2007, 02:17 PM
any idea when the Double ended male threaded connector and the cyan led's will be back in stock?

Jedibum
10-20-2007, 12:42 PM
Hi Tim! I hope I am posting this in the right place! Do you know what Bin# you currently have for 5Watt BLUE?

ArkaiHalon
10-20-2007, 01:41 PM
Corbin's driver coming back anytime soon?

vortextwist
10-26-2007, 06:32 PM
any idea when the Double ended male threaded connector and the cyan led's will be back in stock?

I really need this to finishe the begining stages of my next saber. :cry:

Strydur
10-27-2007, 11:04 AM
It will be at least a few weeks vortex

vortextwist
10-27-2007, 01:19 PM
thanks tim.

MATRIXtjb
10-30-2007, 11:41 PM
Well I was going through trying to get a pricing ov some parts i want to buy real soon like next few days and noticed 50% of the stores offerings out of stock. Its a bit difficult to build a custom saber if i cant even get the basic led kit i need to start not to mention the hilt sections and what not. Im not trying to be rude its just a bit upsetting. It has me considering getting an MR saber and converting it

Strydur
10-31-2007, 12:49 AM
There is around 30 items out of about 300 that are out of stock. If you want to mention which parts you need I could give you a update on availability

vortextwist
10-31-2007, 02:52 PM
It has me considering getting an MR saber and converting it

NOOOOOOOOOOOO!! Don't do that! :cry: It will be much sweeter if you can wait for your custom. :D 8)

Lothel
10-31-2007, 03:30 PM
Any idea when the 1.25 sink tube blade holders might come in stock again? I'm thinking of picking up 2 ...or 4 :roll:

Er Dan Gill
10-31-2007, 05:22 PM
I need a few items, MHS ribbed extension v-grooved, Luxeon K2 Star - Green, and a Luxeon 3w driver. ETA on these would be great. Thanks in advance.

Strydur
10-31-2007, 08:51 PM
1.25 blade holder..december probably

ribbed v-grooved..in a week or so

K2 stars..week or so

3w driver..next week

JediTom
11-01-2007, 01:50 PM
Well worth the wait

Er Dan Gill
11-01-2007, 07:23 PM
Thanks Tim.

USJMB
11-05-2007, 11:51 AM
Hey, Tim! Sorry to bother you and didn't see the answer to this in the forum, but any idea when the 1000mA buck pucks will be back in stock. I want to order more stuff from the shop, but was hoping to do it all at once. thanks

Strydur
11-05-2007, 01:59 PM
Probably not until next week.

USJMB
11-05-2007, 02:25 PM
Ok I can wait for that, in the meantime i will make a list so i can order everything right when those come in. Thanks!

Kamurah
11-14-2007, 07:21 PM
Hey Tim,

Any word / update on when the double male threaded connectors will be back in stock?

Thanks!

gman666
11-14-2007, 07:36 PM
Tim,

Just checking on the V groove as I may have missed them. Same with LED emitter 4. Conversion kits still dead? I need an Anikan and Vader. Last thing, cyan?

Thanks!

Greg

Lord Maul
11-14-2007, 09:13 PM
The conversion kits won't ever come back :wink:

Strydur
11-14-2007, 09:18 PM
V-groove and emitter 4 hopefully next week.

Conversion kits..no plans to restock at this time.

Cyan 3w I got where all green..have to wait awhile and see if they get some real cyans in.

Just got some lux v ones today..havent checked them yet.

Hasid Lafre
11-15-2007, 04:46 AM
Would you do conversion kits on a needed basis?

Like if I wanted say an ani conversion kit would you be abel to make one still?

LAN-ED-TUL
11-15-2007, 05:02 AM
i doubt it, since he has to have them made, he would more than likely have to have so many requested kits, then have them made.

if he even decided to do it. myself i still need a vader and 2 maul kits.

hopefully i will have the money soon, and a couple kits still available, if not, then its gonna be a looong time before i scrape up the cash, to afford a MHS hilt to replicate a Maul in stunt form, without any sound.

i really cant see any reason to stop making the kits just cuz MR wont be doing them any more.

theres still millions of the sabers still floatin around, even after the fact, that folks will want kits for. i had even thought of grabbin a couple more for conversions, but i guess i wont do that now.

Kamurah
11-15-2007, 07:49 AM
:?: Double Male Threaded Connector :?:

An update? Bueller? Anyone?

:D :) :lol:

Strydur
11-15-2007, 08:56 AM
Double males probably next month.

If there was 50 people saying they all wanted the same conversion kit then I would do another run. As it is I have not seen a large enough demand to warrant investing the money into them when I could put that money towards MHS parts or other items.

Hasid Lafre
11-15-2007, 09:49 AM
True

Lothel
11-15-2007, 04:46 PM
Any idea when the MHS claw #1 and the MPS insert #1 will be back in stock? Its almost time to start thinking about christmas presents :wink:

darthdan
11-16-2007, 10:15 AM
On the 1.25" blade holders, were you thinking early december or late december? I have requests for about 5-10 sabers and kind of need some.

Strydur
11-16-2007, 01:48 PM
Well we always seem to run out of stuff at the wrong times.

claw 1.. no in the works atm
MPS inserts end of december probably
1.25" blade holders end of december probably

vortextwist
11-16-2007, 01:58 PM
bad for us but good for you tim. means things are selling good. :D

Kamurah
11-23-2007, 08:39 AM
Tim,

I'm showing ALL hilt styles out of stock? This seems unbelievable...Is this correct?

If so...when will hilts be back in stock?

Thanks

Strydur
11-23-2007, 09:25 AM
Yes they are. They are all basically the same item which is why they all went out of stock at the same time. We can still add a switch hole and do custom grooves etc.. to the 6" or shorter sections. I dont have an exact ETA for the 7" sections yet.

Alai Sadu
11-23-2007, 06:15 PM
I miss only "Screw on LED blade holder style 4" for my saber, any news about it?

Stinky Bantha
12-08-2007, 09:51 PM
When do you think you'll be getting some more of the nimh smart chargers?

darthdan
01-05-2008, 12:37 PM
Sorry to bother, but did the sinktube blade holders get done yet? Just not on the site yet?

Strydur
01-05-2008, 03:02 PM
style 2/4 blade holders and ribbed extensions have been a big mess with the current supplier. At this point I honestly do not know when I will get them in stock.

Nimh chargers next week.

1.25" sink tube led holders..probably February.

Malaki Skywalker
01-05-2008, 03:06 PM
I take it that it goes for the V-Grooved extensions as well? :(

Lord Maul
01-06-2008, 12:17 AM
Tim, when will the other blade holders be in stock? All of them are currently unavailable.

Strydur
01-06-2008, 11:19 AM
We are just out of some of the screws at the moment. Almost all of the items that are currently in the store will be in stock by the end of next week.

DarthFender
01-07-2008, 12:49 PM
Tim,

I noticed that there are no Corbin boards. are they just out of stock, or still being negotiated. In other words. Will there be more? Inquiring minds wanna know.

Strydur
01-07-2008, 10:15 PM
There will be more

Dax Lander
01-10-2008, 04:36 PM
Any idea when the Lux v Royal blue and Heatsink will be available? I'm dying to try and finnish this project as soon as possible (before my B-day).

Strydur
01-11-2008, 01:24 AM
Led's will be tomorrow or early next week. Which heatsink?

Darth_DevilGuy
01-11-2008, 01:26 PM
quick question on LED's, will lux III reds be carried or do I have to order from lumileds?

Dax Lander
01-11-2008, 03:23 PM
Led's will be tomorrow or early next week. Which heatsink?

Lux star Heatsink: Item #: heatsink2
I'm desperate all i need is the heatsink and the Lux Led kit and i get to finnish my saber!

Strydur
01-11-2008, 05:15 PM
The red leds will be here today or first thing next week.

The heatsink2's are out of stock for probably a month.

Lord Maul
01-25-2008, 05:19 PM
Hey Tim, when will you have more MPS speaker grills in stock?

Hasid Lafre
01-25-2008, 05:52 PM
Me and my bro had an idea for the style 5 mps insert, the one with the store logo.

Would it be possable to have it liek a speaker grill.

Like you can look at it and still see the logo but its a speaker grill of sorts still.

Lord Maul
01-27-2008, 06:25 PM
Tim, any time frame on the double female extender with milled slots?

strengthofrage
01-27-2008, 06:51 PM
I am also interested in the slotted female piece, I think my next MHS will be a classic look. Rubber grips aren't really my thing but I would like to try my hand at a film inspired hilt. The females slotted piece is really neat.

The other piece Maul asked about, the MPS speaker grille insert, I would be interested in a few of those also.

Jay-gon Jinn
01-27-2008, 07:10 PM
I'm waiting for the ribbed/v-grooved extensions to come back. Got plans for another brass/mhs saber in my head....

Tenric Starkindler
02-01-2008, 04:22 PM
Tim, any time frame on the double female extender with milled slots?


I'm waiting for the ribbed/v-grooved extensions to come back. Got plans for another brass/mhs saber in my head....

Ooo. Ooo. What they said! Me too!

**hope I still have the cash when they come in** :(

sar-oi
02-03-2008, 01:47 PM
me too.:-)

Hasid Lafre
02-03-2008, 02:43 PM
m/m with the id of the ribbed and vgrooved sections, thatway most battery packs can be slid thru them.

valeon
02-03-2008, 10:44 PM
Any idea when the 7.2V AA 2600mAh NIMH Rechargeable battery packs are gonna be back in stock? I'm gonna need it for my CF saber.

Lord Maul
02-03-2008, 10:45 PM
m/m with the id of the ribbed and vgrooved sections, thatway most battery packs can be slid thru them.

Wrong thread man. This is a store stock thread, not a wish list.


Tim, any updates???

goldsaberwarrior
02-04-2008, 02:23 AM
Dang can't believe this thread is still up.

Darth_DevilGuy
02-04-2008, 11:56 AM
looks like the three watt reds are gone again, any idea when they'll be back? I was trying to get an order together and now I'm missing the LED.:rolleyes:

Hasid Lafre
02-04-2008, 02:32 PM
*waves hand*

Go with a red-o instead

*puts hand down*

goldsaberwarrior
02-06-2008, 03:35 AM
*waves hand*
Or should he.
*puts hand down*

Moordak
02-06-2008, 09:25 AM
Any idea on when the speakers will be back in stock? That's about all I need to have the parts to finish the RGB saber I'm working on.

Strydur
02-06-2008, 10:40 AM
Speakers may be a couple months. We thought we had a some on the way but they showed up and where the wrong size.

USJMB
02-07-2008, 09:59 PM
i looked through the thread and didn't see it asked recently. Any idea when the MPS speaker grills, and the cyan Lux III leds will be back in?

darthdan
02-09-2008, 07:09 AM
any update on those sinktube blade holders?

Hasid Lafre
02-15-2008, 04:57 AM
Will the 7.2V AAA battery pack fit in the ribbed sections?

tullfan81
02-19-2008, 08:14 PM
Any idea when cyan III's will be back in stock?

TheCheeker
02-21-2008, 08:59 PM
any update on the mhs ribbed/v grooved extension pieces?

Treadingwolf
02-22-2008, 06:05 PM
any update on the mhs ribbed/v grooved extension pieces?

I was Just going to ask the same question heh.

Strydur
02-24-2008, 11:56 AM
cyan 3's are on backorder

Ribbed and ribbed v-grooved should be in stock by the end of the month.

Barmic Rin
02-25-2008, 01:00 PM
Tim, any ETA on those sink tube blade holders? Gonna need like 5 or 6 of those.

Also, I had to register as a new customer as I still can't get in as a returning customer.

Cheers!

vortextwist
02-25-2008, 01:16 PM
Also, I had to register as a new customer as I still can't get in as a returning customer.
Cheers!
I think everyone had to barmic. atleast I did.

Barmic Rin
02-25-2008, 01:25 PM
Dammit! I had the actual name of those blade holders in one of my previous orders!

Well, lets assume Tim knows the ones i'm talking about, he sold them after all!

Cheers VT, goes to show when my last order was! :.P

tullfan81
02-26-2008, 04:40 PM
i was getting ready to checkout and i noticed these are out of stock...wassupwitdat?

Strydur
02-27-2008, 09:47 AM
More fun supplier issues. I should have some by the end of the week or early next week along with the ribbed and ribbed v-grooved sections.

strengthofrage
02-27-2008, 11:31 AM
Cool, I am ready to start compiling parts for my next obsession lol :)

ArkaiHalon
02-27-2008, 11:38 AM
excellent. As soon as thos 1.25 blade holders are back in stock, i have a feeling they'll be out of stock very quickly.

ArkaiHalon
02-28-2008, 12:36 PM
what about MHS sink tube adapters?

Strydur
02-29-2008, 06:28 PM
sink tube adpters..next week
style 4 blade holders..next week
Ribbed v-grooved..next week
5 deg optics..should be next week
k2 stars..should be next week
Ribbed..In Stock!!

Barmic Rin
03-01-2008, 01:17 PM
Cool, best start selling my blood again to afford several of those sink tube holders.

Strydur
03-03-2008, 10:12 AM
I didnt say sink tube holder...I said sink tube adapters :p

The 1.25" sink tube holders that I think you are referring to will be awhile yet. I know everyone liked these and I am working to get them as fast as I can.

Barmic Rin
03-03-2008, 02:49 PM
I'll learn to read one day...... ;.P

Stinky Bantha
03-05-2008, 04:52 PM
When will the luxeon heatsinks be available? The ones not made for use with MHS

ArkaiHalon
03-07-2008, 10:44 AM
sink tube adpters..next week
style 4 blade holders..next week
Ribbed v-grooved..next week
5 deg optics..should be next week
k2 stars..should be next week
Ribbed..In Stock!!

Not to be pushy or nothin, but it's next week. Any word on the sink tube adapters? It's the only piece I need to complete my next order.

Atomic
03-07-2008, 10:57 AM
Same here :)

madhorizons
03-07-2008, 11:37 AM
When will the luxeon heatsinks be available? The ones not made for use with MHS

Ditto that ^

I need one b/c the ID of my hilt is only 1" and no other heatsink will fit it. I won't purchase the rest of the electronics until I know i have a heatsink that I can use.

Onli-Won Kanomi
03-07-2008, 11:59 PM
Will the 3.5" female section that was grooved for the spacers and rubber t-grips be coming back anytime soon?

Atomic
03-10-2008, 02:10 PM
Do my eyes decieve me?

1.5" sink tube adpters? In stock?

ORDERED!

Thanks :)

ArkaiHalon
03-10-2008, 05:13 PM
Do my eyes decieve me?

1.5" sink tube adpters? In stock?

ORDERED!

Thanks :)


WOO HOOO

3 new sabers can begin!!!

vortextwist
03-10-2008, 05:14 PM
could have just cut a 4" peice in half and had the same thing:)8)

Atomic
03-10-2008, 05:32 PM
No, I need the threads. Emitter 3 and Pommel 4, with a 1.25 sink tube as the "grip".

Like so (just going with red, I am done trying to get a good, bright purple):

http://i179.photobucket.com/albums/w302/JAWeinberg/Light%20Saber/saber4.jpg

The hard part will be getting one of my crystals in the pommel and having sound...

Luke-SkyMarcher
03-12-2008, 03:10 PM
Any ETA on the 7.2v li-ion battery packs?

Obi-Dar Ke-Gnomie
03-14-2008, 08:14 PM
Do the new switches have a curved back to match the curve of the hilt, or are they flat on the back?

Hasid Lafre
03-15-2008, 04:47 AM
What is a 4 or 3 inch section when you cut it in half? Anyone.


No, I need the threads. Emitter 3 and Pommel 4, with a 1.25 sink tube as the "grip".

Like so (just going with red, I am done trying to get a good, bright purple):

http://i179.photobucket.com/albums/w302/JAWeinberg/Light%20Saber/saber4.jpg

The hard part will be getting one of my crystals in the pommel and having sound...

xl97
03-15-2008, 06:21 AM
one of the main hilt sections HAS double female threads on BOTH ends it states..

so cutting it in HALF (as stated) would give you 2 x 2in. 'halves' both with a female threads on 1 end... (just like a sink tube to MHS adaptor)..... no?

;)

vortextwist
03-15-2008, 06:25 AM
ya I think sid was just being a smart alec.lol You just wouldn't have the pre-drilled/taped holes. Which I think would be easier since you don't have to try and line them up.

Jay-gon Jinn
03-16-2008, 12:06 PM
I was about to place a fairly large order for parts, and noticed that the led blade holders are all out of stock, yet the el's are all there as well as the led heatsinks...what's missing that the led blade holders are out of stock?

EDIT: Looks like the allen wrenches are out of stock...personally, I have six of the damn thingas already, (not counting the one in my toolbox that I already had to begin with) and don't really need anymore...

xl97
03-16-2008, 12:09 PM
hmm....that IS funny.. as "I" thought the ONLY differnce (to save time/money) was the 3/4 reducer??

(but what do I know?..Im fairly new around these parts) ;)

Hasid Lafre
03-16-2008, 01:35 PM
The reduser and the washer for the el mono jack.

DarthFender
03-16-2008, 02:39 PM
Heat sink and nylon screws. If they are out of stock, then it's not an LED holder.

Oh, yeah, and the Allen wrench. Could be that, too.

xl97
03-16-2008, 02:58 PM
ahh...very true.. good one.

Obi-Dar Ke-Gnomie
03-16-2008, 06:57 PM
The 1.25" sink tube holders that I think you are referring to will be awhile yet. I know everyone liked these and I am working to get them as fast as I can.

Can't wait. I can definitely use one.

Can anyone tell me what the total assembled length would be?

xl97
03-17-2008, 05:52 AM
sure hopes its soon.. Ive personally been waiting for several months myself...

;)

BhujangiJedi
03-17-2008, 11:07 AM
Also eagerly awaiting 1.25" sink tube blade holders.

Barmic Rin
03-17-2008, 01:01 PM
Any update on those blade holders Tim?

I REALLY wanna give you my money!!!!!!!!!! LOL!!!!

Malaki Skywalker
03-21-2008, 04:54 AM
Are the PLI's gone for good? or are they just not listed on the site yet?

Thanks :)

chaos
03-21-2008, 03:15 PM
Hey Tim,

Are you going to be getting anymore of the MR Luke ROTJ conversion kits in?

vortextwist
03-21-2008, 07:48 PM
he just has to modify a maul holder is all.

Onli-Won Kanomi
03-26-2008, 11:06 PM
I'm still wondering about the 3.5" lengthwise grooved double female section with divider ribs and rubber T-grips set that fit it...any ETA on those?

Strydur
03-26-2008, 11:27 PM
None at the moment. I actually have some where on one end the threads broke through the outer skin..which if you cover them with grips you really wouldnt notice. I will sell those for $15 each including the 7 dividers..just use the custom work fee. While supplies last :)

xl97
03-27-2008, 02:03 PM
pics of these? not pictured in the store are they? this the v-ribbed?

also just wanted to bring up those pesky 1.25 blade holders everyone is coveting.. ;)

I know I need few.. ;)

Count Malik
03-28-2008, 01:22 AM
One question. when will the battery packs be back in stock? Thanks.:)

Barmic Rin
03-28-2008, 05:26 PM
That aint too bad a deal Tim. I was looking at making a saber with two of those, based on Galaxies Ancient Saber, but i'll grab those other bits first when you get them in.
Maybe start that one if u have any left for the next scratch & Dents if you do anymore.

Do the T-shirts come in extra geeky? Was gonna give you some free advertising at the UK shindig! LOL!!!

strengthofrage
04-01-2008, 10:30 AM
I am in need of 4 700mA buckpucks (two seperate projects), any idea when they will be back in stock?

Hasid Lafre
04-03-2008, 03:37 AM
Ok I was wondering if we could get some dimentions on the guarded switches.

Like length and width they take up.

Iam trying to figure out how much space 2 switches would take up if they were sorta close next to each other(one on top of the other, whatever use your imagination).

jpbeck
04-03-2008, 07:06 AM
I have some switches on the way I'll take pictures and throw my caliper on one if you'd like.

Hasid Lafre
04-03-2008, 07:50 AM
kool kool!!

Strydur
04-03-2008, 06:46 PM
700mA bucks are on backorder but it shouldnt be a very long wait.

strengthofrage
04-04-2008, 10:31 AM
Thanks Tim :)

Malaki Skywalker
04-07-2008, 12:37 PM
ETA on MPS style 4? and MPS insert 1?

DARTH KALEL
04-09-2008, 12:00 PM
so is the #7 slotted not going to make the list, sounds like it would be a great seller.

hullbreach
04-09-2008, 02:22 PM
ETA on style 5 blade holders? Thanks!

Hasid Lafre
04-10-2008, 06:56 AM
About the gender changers, now I know putting in in an area near the bladeholder is a high stress are but how much of a stress are is about 2" or so from the bottem of the hilt?

Strydur
04-11-2008, 09:06 AM
That would probably be fine Hasid.

Style 5 holders are a week or two out.

Hasid Lafre
04-11-2008, 09:06 AM
Thanks tim.

jpbeck
04-11-2008, 10:34 AM
I'd really like to buy 3 or 4 Cyan LUX III's-- any idea when you'll get some in stock?

PS3NL
04-12-2008, 06:43 AM
A ETA for the short Graflex pins? Thanks

fawnheart2000
04-13-2008, 12:11 PM
When will the white K2's be in stock?

Barmic Rin
04-16-2008, 12:59 PM
Tim, how much of a pain was the emitter to do for beggarsoutpost? That kinda looks quigon like & you know several people have been asking how to do his saber with MHS, so why not see if it's a viable emitter to stock?

For those that haven't seen it, it's 3rd post here:
http://forums.thecustomsabershop.com/showthread.php?t=4329

Also, Blade holders ETA? We all love them so!!!!

Hasid Lafre
04-16-2008, 01:01 PM
if you click on the post number it brings up another window and you just copy that l;ink and tha tlink will take you to a page that has just that post on it.

Pritty cool about these type of forum pages.

xl97
04-16-2008, 01:02 PM
Also, 1.25 Blade holders ETA? We all love them so!!!!


:)........

Barmic Rin
04-16-2008, 01:07 PM
*Slaps XL for correcting me*

I think Tim knows what ones dude. I've been after them for a while now...

Hasid Lafre
04-16-2008, 01:18 PM
Yep all 13 of them

xl97
04-16-2008, 01:19 PM
*Slaps XL for correcting me*

I think Tim knows what ones dude. I've been after them for a while now...


LOL.. I wasnt evern trying to 'correct you'.. I was adding my own 'slip in' there..
'I' meant the 1.25's I wasnt trying to say YOU were saying the 1.25's (even though you were evidently..)

Barmic Rin
04-16-2008, 01:21 PM
*Slap withdrawn... For now....*

Has, it's 15 now. Cousins boyfriend wants one, & I figure I may as well grab a spare!!!

Hasid Lafre
04-16-2008, 01:22 PM
**** you might as well get 20 the way things are turning out to go.

xl97
04-16-2008, 01:22 PM
umm..yeah.. apology accepted. ;)

Barmic Rin
04-16-2008, 01:24 PM
Oh, it wasn't an apology.... LOLZ!!!!!!!


Has, you gotta buy in bulk when you want to start a business.

London Saber Workshop is on it's way to creation....

xl97
04-16-2008, 01:25 PM
(ba dum tisch)


it was 'tongue' in cheek.. (sigh)...

Barmic Rin
04-16-2008, 01:28 PM
I prefer TONGUE in cheek... LOL!!!

JK Dude!

Hasid Lafre
04-16-2008, 01:29 PM
lol, you might as well work togeather with that jq or whatever guy that buys mhs stuff.

xl97
04-16-2008, 01:31 PM
lol, you might as well work togeather with that jq or whatever guy that buys mhs stuff.
?? ....... ??

Barmic Rin
04-16-2008, 01:36 PM
Na, my hilts won't be MHS like his. I'm making from scratch.

Obi-Dar Ke-Gnomie
04-16-2008, 08:45 PM
Has, it's 15 now. Cousins boyfriend wants one, & I figure I may as well grab a spare!!!

Personally, I don't care how many you buy, as long as you leave one for me.;)

strengthofrage
04-17-2008, 04:10 PM
Any word on the 700Ma Buckpucks?

I was hoping to order all at once but I saw that the speaker grille pommel inserts were in today and ordered anyhow.

Strydur
04-18-2008, 08:37 AM
700's will be here next week.

Er Dan Gill
04-18-2008, 07:03 PM
Any Eta on the Screw on pommel style 5?

Hasid Lafre
04-21-2008, 11:55 AM
DUDE the new mps insert style 9 is fricking sweet.

If only my brothers band was still around that would be kick butt.

That was almost like there logo. Thats awsome.

Hasid Lafre
05-01-2008, 02:30 AM
Man tim, why couldent you do the discount code when I made my order? I alwase miss out on the good stuff. :(

xl97
05-01-2008, 05:21 AM
LOL..me too I could have waited only a few more days and caught a discount..

one discount in the last 4 orders would have been nice! LOL

NeptuneTQ
05-01-2008, 06:39 AM
isn't that always the case? I just made 3 orders and missed out on it ^_^ Ah well, c'est le vie :)

ArkaiHalon
05-01-2008, 08:05 AM
At least you didn't just forget touse the code. I made like 3 orders during the free calendar with purchase, and forgot to use the code each time.

xl97
05-01-2008, 08:33 AM
LMAO!.. ouch..

yeah that IS worse..

Onli-Won Kanomi
05-01-2008, 09:49 AM
Any ETA on Cyan Lux Vs?

And 7.2 volt 2600 mah NIMH AA packs?

LAN-ED-TUL
05-01-2008, 03:02 PM
and how about the other claw arms you used to have? i like those better than the ones i had to get, cuz they were the only one ins stock, and the others have been out of stock for quite some time.

ArkaiHalon
05-05-2008, 01:04 PM
Will there be a restocking of the NIMH smart chargers?

Strydur
05-05-2008, 05:55 PM
Claw setup is going to be redone to allow for a less expensive setup. No ETA yet.

NIMH chargers...a week or so.

Draconis Magnus
05-11-2008, 09:14 AM
Hi,

Just wondering when MHS inserts are going to be back in stock... style 1, 6, and 7s? Thanks!

Draconis

Strydur
05-11-2008, 10:12 AM
early next week

DarthFender
05-11-2008, 12:22 PM
Tim,

When will be seeing these wonderful new Driver boards form Corbin?

Strydur
05-11-2008, 03:05 PM
next week as well

Count Malik
05-11-2008, 04:20 PM
Greetings. What about batteries? thanks!

SWAT Strachan
05-12-2008, 11:47 AM
Right, I think I'm about ready to place my order for all the bits I'll need for the Ronin, but do we have an ETA for the following parts?


Luxeon V in green
5° lens for the above
Pommel insert style 1

So far (without the parts above) I'm already up to $180, and that's without the powder coating and machining I'd like done :shock:. Once I have an idea on a due time for the bits I need, I'll get in contact regarding the powder coats etc.

Cheers Tim :).

Scott.

Strydur
05-12-2008, 12:43 PM
All of that should be this week.

Hasid Lafre
05-12-2008, 01:02 PM
Hay tim, you chould check your gender chagers for straightness, the one I got when parts are screwed togeather one part is off kilter a bit.

Its no biggie for me but others might have a problem with it.

Barmic Rin
05-12-2008, 02:20 PM
Do I hear Scratch & Dent Has? LOL!!!

Hasid Lafre
05-12-2008, 03:05 PM
No iam just saying that it could be that one as a fluke but just an FYI to check to make sure that they arnt off kilter to much.

xl97
05-12-2008, 03:34 PM
(holding off on an order.. for as.....long.....as.....possible....)

(chargers, batt. packs, Corbins driver..etc..etc.. oh and MHS parts..of course.)