foxphyre
04-10-2016, 01:58 PM
So, I'm new to all this and have watched the videos one too many times as well as read threads and other sources. 13703
Well I wanted to check my wiring and see if my battery will be able to sustain the LEDs. On the side are the resistors and values that I got from the videos. I am going for a purple blade.
Also can the dyna Ohm resistor be placed on the accent LED or does it need one of the appropriate ohm. The green accent led that I calculated called for a 1/8W or 68ohm resistor but the shop doesn't have any of those. Can I use 1/4W 18 Ohm or the 1/4 82 Ohm? Which matters more: the Watt or the Ohm? Yellow is 1/8W or 56 Ohm. Should I just go ahead and place the green accent led onto the deep sleep connection on the nano?
Will the FoC be green since I hooked up the green or will it be white?
Can the accent led on the momentary switch and green accent led be on the same resistor or should I use a buckpuck or separate resistors?
Thanks in advance!
http://i1167.photobucket.com/albums/q636/kitsune861/wiring%20with%20pictures.png Sorry about that. Heres the link.
Well I wanted to check my wiring and see if my battery will be able to sustain the LEDs. On the side are the resistors and values that I got from the videos. I am going for a purple blade.
Also can the dyna Ohm resistor be placed on the accent LED or does it need one of the appropriate ohm. The green accent led that I calculated called for a 1/8W or 68ohm resistor but the shop doesn't have any of those. Can I use 1/4W 18 Ohm or the 1/4 82 Ohm? Which matters more: the Watt or the Ohm? Yellow is 1/8W or 56 Ohm. Should I just go ahead and place the green accent led onto the deep sleep connection on the nano?
Will the FoC be green since I hooked up the green or will it be white?
Can the accent led on the momentary switch and green accent led be on the same resistor or should I use a buckpuck or separate resistors?
Thanks in advance!
http://i1167.photobucket.com/albums/q636/kitsune861/wiring%20with%20pictures.png Sorry about that. Heres the link.