PDA

View Full Version : Testing Speaker



KnightRevan
03-28-2016, 06:16 PM
I was soldering my speaker wire on and solder got into an area that worries me. Is there a way to test the speaker without soldering it to the board? I don't have my speaker mount yet and just want to test the speaker to make sure it will work properly before wiring it up.

Gorth
03-28-2016, 07:06 PM
Well you can always connect the battery and a switch to the board then touch the two sides of the speaker to the board. When I tested mine, I really just taped everything together or used a bread board then turned it on.

darth_chasm
03-28-2016, 08:49 PM
You can just touch the leads to the ends of a regular AA battery and check it. You should hear static.

KnightRevan
03-29-2016, 06:05 AM
I tested it with the AA first and then decided to go ahead and just do a quick boot up test on the nano biscotte. Booted up fine and sound pretty good. Thanks for the suggestions.