Problems with the Power Couplings

[DarthWolf-Enrir]

I've got a situation...
My battery holder isn't contacting with the positive end of the certain battery I have, thus resulting in not being able to power any of the parts in my saber.
Anybody know how I can fix this situation DIY or will I need to purchase a different battery cell/battery holder?

[darth_chasm]

What battery and what holder?

[DarthWolf-Enrir]

I was trying to post a picture, but somehow I couldn't.
This is the battery holder:
http://www.thecustomsabershop.com/18650-Single-Cell-Holder-P886.aspx

This is the battery:
http://www.amazon.com/gp/product/B00DHXY72O?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

[DarthWolf-Enrir]

Hope this works
13616

[darth_chasm]

Well, that's an unprotected battery so I would say chalk it up as bad purchase and buy the right battery. You'll want a button top battery that is PCB/PCM protected. There are trust fires in stock now.

[Silver Serpent]

You can solder a bit of metal (or just a glob of solder) to allow electrical connection. Solder to the battery holder (less dangerous) or to the battery itself (be careful of overheating!).

[DarthWolf-Enrir]

Thank you. I bought a pack of trust fires, and I'll try what you mentioned.