PVC Chassis?

[Nicholas F.]

Hey guys, i?m sorry if there has already been a Thread about this, but unfortunatly if there is one i couldn?t find it.

so the thing i wanted to ask is: how to make a PVC chassis? i?ve seen many doing this but nothing about HOW they did it. could someone help me :)

Thx
Nicholas :)

[Silver Serpent]

Simple description for you:

1. Find piece of PVC tubing that fits inside your saber. If the PVC is too large, you may need to use a lathe or other tool to decrease the size of the PVC.
2. Draw a design for how you want your chassis to look. This will depend greatly on what components are going in your saber, and how you want them positioned.
3. Use a rotary tool like a Dremel to cut the PVC to the shape you want. Hacksaws and hand files will also work, but they are slower.
4. Clean up the chassis with some light sanding, hand files, etc.
5. Install parts, adjust chassis if necessary.