TeeBeutel
02-18-2016, 03:37 AM
Hello,
I`m 21y old and just started to make lightsabers in my spare time from university. I`ll share my first one here.
Everything is built up from scratch and full material. No MHS parts or machined parts used. The design i went for is a mixture of some i found on the internet and my own.
http://imgur.com/a/YvXZv (Some pictures i took when building it)
Video of the saber: https://goo.gl/photos/h8p1CnPsDCZtiQ2s8 (hope link works)
Specs:
- 8mm LED-String
- 18650 protected Li-Ion Cell with recharche Port & Kill key
- Naigon`s Spark 2 (due to lack of CF-LS Board)
- 2 W Speaker
- inner steel tube, other parts aluminium
- TCSS 1" thin blade & blade diffuser
- 8 DIN Plug
- Main button + aux button (both momentary)
- Crystal chamber glowing red
- Flash on clash (white) crystall chamber or Blade (depending on soundfont)
- back end of the grip covered with 4 strips of black painted wood
- Something i forgot about
Im still not 100% finished/satisfied with the saber - needs some polishing or a more used look, not sure as of now. Also the crystal chamber is very very basic, maybe i will tune that up a little bit more.
I will probably sell this saber when im 100% done to build another one, hopefully with a plecter CF-LS board (although the naigon`s is really good!)
I`m 21y old and just started to make lightsabers in my spare time from university. I`ll share my first one here.
Everything is built up from scratch and full material. No MHS parts or machined parts used. The design i went for is a mixture of some i found on the internet and my own.
http://imgur.com/a/YvXZv (Some pictures i took when building it)
Video of the saber: https://goo.gl/photos/h8p1CnPsDCZtiQ2s8 (hope link works)
Specs:
- 8mm LED-String
- 18650 protected Li-Ion Cell with recharche Port & Kill key
- Naigon`s Spark 2 (due to lack of CF-LS Board)
- 2 W Speaker
- inner steel tube, other parts aluminium
- TCSS 1" thin blade & blade diffuser
- 8 DIN Plug
- Main button + aux button (both momentary)
- Crystal chamber glowing red
- Flash on clash (white) crystall chamber or Blade (depending on soundfont)
- back end of the grip covered with 4 strips of black painted wood
- Something i forgot about
Im still not 100% finished/satisfied with the saber - needs some polishing or a more used look, not sure as of now. Also the crystal chamber is very very basic, maybe i will tune that up a little bit more.
I will probably sell this saber when im 100% done to build another one, hopefully with a plecter CF-LS board (although the naigon`s is really good!)