Wiring Check

[markg16]

I was wanting to check the wiring for my current build. I plan on adding a NB once they are back in stock but until they are I was just wanting to have a simple stunt saber.
The switch I have is momentary because I am going to wire it to the NB in the future so I'm not worried about a momentary to latching converter.
What do i wire the switch - to?
13374
The second picture is an idea of what my finished build will look like just so you can see
13375

[Silver Serpent]

Locate the following two points on your diagram:

1. The junction connecting the battery +, recharge +, and the rest of the + wires.
2. The junction directly to the left (the one with the DynaOhm directly above it).

Cut the wire between those two junctions, and connect your switch terminals to those cut wires. One terminal to each wire. It doesn't matter which, since switches don't have polarity.

Since you have a momentary switch, you will need to hold the button down to keep the saber on.