PDA

View Full Version : The recharge port schematic



Ponta
02-10-2016, 03:43 AM
Hi, first off, sorry if this is the wrong place to post this.

Now with that out of the way, here is my question:
I just received my new NBv3, and I'm sitting here doing diagrams of how I should wire it, it all coming along good until it's time to hook up the recharge port, the thing is that I'm not using the switchcraft brand that seems to be standard here, but this one:
http://www.tme.eu/en/details/fc681473/dc-power-connectors/cliff/
The info PDF
http://www.tme.eu/en/Document/0d995963edb3cbb7d08fda70a6343b54/FC681473.pdf

It's a bit different and I have tried to locate which pin is which by researching the schematics and the NB manual and basicly came up with this:

http://s18.postimg.org/3m1zres2t/image.jpg (http://postimg.org/image/3m1zres2t/)

Pin3 is clear, that's +, but 1 and 2 I am a bit unsertain of.

So am I on the right track or way of? I Don't want to fry the heart of my first saber!

Oh, and first post ever after lurking around for awhile, be gentle with me!

:)

Yubnub
02-10-2016, 07:11 AM
Hopefully all you need to know... regardless of make. Key tip = get a multimeter ;)

https://www.youtube.com/watch?v=wemK6SD0Imo

Ponta
02-11-2016, 03:17 AM
Hopefully all you need to know... regardless of make. Key tip = get a multimeter ;)

https://www.youtube.com/watch?v=wemK6SD0Imo

thank's for the answer, got myself a multimeter and hooked up a normal AA battery to the recharge port.
Turns out my schematic i was spot on! :)