PDA

View Full Version : Where is the swing sensor on this econo board?



wolf69
01-16-2016, 12:30 PM
Hi,

I have dissasemble a bladebuilder Vador, and i want to upgrade to a double swing sensor but i have doubts about where is the original swing sensor ��13018

wolf69
02-01-2016, 04:59 PM
Up please

I know the green is the clash sensor, i assume the big black thing is the swing sensor but i dont understand why there are 3 legs/wires

djblingbling1
02-17-2016, 06:33 PM
Following since Id like to upgrade mine.

Jay-gon Jinn
02-17-2016, 09:42 PM
I'd have to agree that the big black sensor on the pad labelled "SW3" is very likely the motion sensor. It probably has three legs on it for one being a ground, and the other two being the positives for the ball bearing that is inside it to make contact with to achieve multiple swings. Again, just my guess.

wolf69
02-19-2016, 12:57 AM
Thank you
That's what i was thinking but i needed a second opinion