PDA

View Full Version : Heiland Head Piece Replica and MHS.



Ryma Mara
01-04-2007, 01:32 AM
It says that it can be made to fit the mhs easily.

What is needed to make it "fit"?

jjshumpert
01-04-2007, 07:48 AM
tap holes to match the head on your blade holder after cleaning and painting, MAKE SHURE TO CLEAN YOUR PART BEFORE PAINTING!!!

Strydur
01-04-2007, 10:31 AM
Since the blade holders are no longer as large as a sink tube you may need to use a section of sink tube or similar item to shim the head piece.

Tenric Starkindler
01-04-2007, 11:46 AM
sorry to sound ignorant....but does that mean that all of the blade holders now fit inside a 1.5" tube?

jjshumpert
01-04-2007, 11:51 AM
the majority of the mhs parts will fit inside the sinktube as far as i know...

xwingband
01-04-2007, 12:38 PM
sorry to sound ignorant....but does that mean that all of the blade holders now fit inside a 1.5" tube?

Yup... except the obvious ones like the Luke and Obi ones.

jjshumpert
01-04-2007, 01:07 PM
i thought the ribbed sections would go?

xwingband
01-04-2007, 01:09 PM
i thought the ribbed sections would go?

Yeah... it's pretty much just the single saber pommels that don't fit.

jjshumpert
01-04-2007, 01:17 PM
on the subject of the ribbed extensions, i saw a few weeks back someone had used one for a resonance chamber with slits cut between the ribs, tried it here in the shop and let me tell you this is a great idea guys, im getting sound at 3 times the volume of a stock mr with the same speaker!

Ryma Mara
01-04-2007, 04:05 PM
Thanks guys.

vortextwist
01-04-2007, 04:24 PM
What is needed to make it "fit"?

duct tape, bailing wire and a tootsie roll. :lol:

well maybe a pich of tape

Ryma Mara
01-04-2007, 04:26 PM
HAHA

Strydur
01-04-2007, 04:43 PM
Basically just the last few pommels I have wont fit inside a sink tube. Everything in the future will be the same OD as the rest of the MHS sections to make the look flow together better.

Janson
03-07-2007, 04:26 PM
So will a graflex or heiland flash tube fit with a MHS pommel and blade holder?

vortextwist
03-07-2007, 04:32 PM
tim can machine you an custom blade holder for either. Not sure which pommel your talking about.

Lord Maul
03-07-2007, 05:17 PM
does pommel 3 sit flush with the rest of the MHS?

vortextwist
03-07-2007, 05:21 PM
I think all the new ones will but not sure how many of the old one he has left.

Phiily Manyaan
07-20-2008, 06:44 PM
This is an old thread but better than starting a new one...What's the best way to paint the heiland head piece?