cant find led drivers

[maybach123]

the 2nd option for leds is an led driver cant find that on customsabershop.com
12597
thanks

[FenixFire]

If you want sound use a sound board and resisters, if not just resisters or a buck puck.

[maybach123]

If you want sound use a sound board and resisters, if not just resisters or a buck puck.
i thought the led driver was separate from sound
Option 2
The driver board is a specially designed circuit board that has special features allowing the saber's blade to appear to extend and retract, flash on impact and shimmer on command. The extension/retraction effects are best seen with our new custom coring blades.These drivers can use either momentary or latching switches, you just have to order the right type. It outputs 1000mA, 1200mA, or 1500mA, depending on which board you get. This output can not be changed.

[sgcdialler]

I'm not even sure what you're asking here. If you want to build a stunt saber, with no sound, you'll need a buckpuck to control the current going to the blade LED. If you want sound, all of the soundboards sold at TCSS will control the blade LED as well (within the details specified in each board's respective manual). The NB and Prizm don't have an onboard LED driver, so you'll need to use a resistor with those, but the Crystal Focus and Petit Crouton both have an onboard LED driver circuit.

[Miraluka]

I'm not even sure what you're asking here.

Ditto. There doesn't actually seem to be a question here.

[Nebula]

From my understanding, there used to be a led driver with the special effects, but it cost just about as much as a Nano Biscotti so they stopped selling it.

[maybach123]

Ditto. There doesn't actually seem to be a question here.
there is a question on saber led tutorial they say option 2 led driver i cant find it on customsaber shop the actual shop i cant find it

[Forgetful Jedi Knight]

there is a question on saber led tutorial they say option 2 led driver i cant find it on customsaber shop the actual shop i cant find it

They probably stopped carrying it, because there are sound boards that are about the same price nowadays.

[Cire Yeldarb]

Yeah, TCSS used to sell a separate LED driver board, but like others said it cost about as much as the Nano Biscotte does now, and the Nano can do everything that board did with the addition of sound and a few other features

[Darth Nater]

The NB is an incredible value. It basically takes away much of any reason to use an econo board. You can make it simple and still have great sounds, and it will still drive more advanced options if desired.