PDA

View Full Version : Corbins Driver



phrstbrn
12-25-2005, 09:59 AM
I'm trying to plan for my saber. I was looking at Corbin's driver and I can't find anywhere that says what the input voltage is supposed to be. I understand that the driver uses up some power, but how much?

Also, will the driver fit in the modular hilt system?

Thanks in advance!

xwingband
12-25-2005, 11:02 AM
http://www.youcanknow.org/corbin/

^^^ Corbin's main site

He has a wiring guide up. He recommends 4AA for a 1W LED and 5 for a 3W. The specs page also says it's 1 5/8 x 1 1/4 x 3/8 so I think that would fit in the modular sabers comfortably.[:D]

<center>http://www.dewbackwing.com/dewbacks/files/pinupbanner.jpg
www.dewbackwing.com</center>

Strydur
12-26-2005, 11:39 AM
They need to be lightly shaved on the side to fit but then it will be held in place good and tight.

Tim
The Custom Saber Shop