NB with flash on clash help

[daviesevan68]

I just switched from a single die to a GGW and a PEx for flash on clash. Everything seems to be wired right but it shuts down when it tries to flash. It doesn't do it every time and the swing sounds seem to be going off too often and when the saber is still. Any ideas would be appreciated.

[darth_chasm]

Low batteries or improperly calculated resistors. For the swings anyway.

Not sure about the FOC and shutting off. Could be related to the above.

[clahey83]

try adjusting your drive parameter down.

[Greenie]

Have you fully charged? My NB swings randomly when the battery is low. :mrgreen:

[daviesevan68]

Thanks everyone. I was suspicious of the battery so I will give it a charge and go from there.

[daviesevan68]

Thanks everyone I got it working. I charged it up and it was still having issues so I checked the resistors and that was the problem.