timtitan@gmail.com
11-18-2015, 07:12 AM
Hi, I'm thinking about making a combination lightsaber/laser pointer using a rotary switch to select the mode. So the modes would go off/laser/color1/color2/.. and so on, with a momentary switch for laser/blade on/off, was thinking of using a ring star led mount like this one (http://www.ledsupply.com/leds/cree-xpe2-rgb-high-power-led), but I'm not sure about what brightness leds are really required. I'm pretty greedy feature wise, so I wanted to be able to change the blade color, and also be able to have flash on crash, while also being able to have a nice study and stylish laser pointer while I'm teaching. Essentially I was thinking that I would using a ring mount so I could align the pointer diode to lase through the central hole, with drilled and sanded optics and a custom heatsink to mount the diode flush. Is this the best ring mount to use or does anyone know of a better one for my application?