Needing Help checking my wiring. First time build.

[SaberN00B]

First saber I've ever built would appreciate any help. Just need to make sure this wiring is correct or if there are any parts I need to get, such as a buckpuck. Thanks for all the help.


12319

[Cire Yeldarb]

You're going to want a resistor (your Battery doesn't have enough Voltage for a Buckpuck - I prefer resistors anyway) for your main LED first off.

Secondly, I'm pretty sure that pre-wired switch is wired for a soundboard connection, not for a stunt setup so it will not work as you have it conencted

[BartElroy]

Um, no. Your wiring guide is wrong. The switch is an illuminated AV momentary switch. The second set of leads is for the LED in the switch. With the recharge port, one set off leads is set up for the battery, and one is set up for the sound board. The pre-wired stuff is wired assuming you'll be using a sound board, and what you've got set up will not work.