Rayataz
10-31-2015, 12:44 PM
Hey guys,
I've been trying to diagnose an issue with my wiring setup as of late. Basically, after I've wired everything up, the electronics work with exception to the flash on clash effect. I'm using a Blue/Blue/White Cree LED and the white light doesn't seem to flash on. I've tested the white LED separately and it seems to be working so I suspect it's the Power Extender that's the problem. Earlier, I had an issue with the system not turning off and I re-wired one of the joints on the Power Extender since I felt that perhaps a wire was soldered too close to the other parts and was causing it to mess up. After re-wiring it, I can now switch off the system but the white light still doesn't flash on clash.
Does anyone have any ideas as to what may be causing the issue? I'm going to be continuing to figure it out but if anyone have any ideas or have come across this issue prior, it may help immensely. Thanks!
Edit: Oh here is my electronic diagram
12289
I've been trying to diagnose an issue with my wiring setup as of late. Basically, after I've wired everything up, the electronics work with exception to the flash on clash effect. I'm using a Blue/Blue/White Cree LED and the white light doesn't seem to flash on. I've tested the white LED separately and it seems to be working so I suspect it's the Power Extender that's the problem. Earlier, I had an issue with the system not turning off and I re-wired one of the joints on the Power Extender since I felt that perhaps a wire was soldered too close to the other parts and was causing it to mess up. After re-wiring it, I can now switch off the system but the white light still doesn't flash on clash.
Does anyone have any ideas as to what may be causing the issue? I'm going to be continuing to figure it out but if anyone have any ideas or have come across this issue prior, it may help immensely. Thanks!
Edit: Oh here is my electronic diagram
12289