DarzuVaan
10-22-2015, 01:39 AM
12232
So above is my wiring, Speaker wires soldered to board along with power source.
red/black JST pairing for activation and momentary Switches. Green JST wiring accent LEDs in switches. Yellow JST for my return to grounds. The problem stems from the main LED wiring the white and blue. when fully put together and turned on the Main LEDs don't turn on until clash and thats just for a flash. So the question is then if the problem is that it flashes on clash should i resister hot wire a new LED line from main power to Main LED then ground it threw the original negative LED line or was there a way to work it for a main LED to turn on when saber is activated....?
So above is my wiring, Speaker wires soldered to board along with power source.
red/black JST pairing for activation and momentary Switches. Green JST wiring accent LEDs in switches. Yellow JST for my return to grounds. The problem stems from the main LED wiring the white and blue. when fully put together and turned on the Main LEDs don't turn on until clash and thats just for a flash. So the question is then if the problem is that it flashes on clash should i resister hot wire a new LED line from main power to Main LED then ground it threw the original negative LED line or was there a way to work it for a main LED to turn on when saber is activated....?