Need a d-ring belt flip for my Lux Luke ep6

[Kit Fisto]

Hey I was wondering if anyone knew where to buy some sort of belt clip for a saber that has a d-ring (not covertec)
I would really love to wear my Lux Luke on my belt..
Thanks in advance.
Master Fisto

[vortextwist]

I know Tim carries some (if your talking about saber end) but here is one I like better.

http://www.blast-tech.com/products_beltClips_BC-3.asp

[xwingband]

I have 10 of these:

http://www.saberbelt.com/images/SaberHook008.jpg
http://www.saberbelt.com/images/SaberHookBorder.jpg

All you'd need to do is attach them. They're meant to be riveted but heavy duty snaps might do too.

[xwingband]

I know Tim carries some (if your talking about saber end) but here is one I like better.

http://www.blast-tech.com/products_beltClips_BC-3.asp

He meant a clip... not the d-ring itself.

[vortextwist]

oh well I tried :(

edit: I need to read a little slower, now that i read it again i see it.

[LAN-ED-TUL]

i got one from sith armor, and off it i made a copy with sheet aluminum just like it.

just need a dremel to cut it out, and sandpaper to smooth it up.

a vise helps out to aid with the bends for the d-ring to slip on.

or even some sheet stainless from the hardware store can be used. ive done both.

[Lord Maul]

i bent a picture hanger for my first clip. the one i have right now is a locking clip thing from home depot

[LAN-ED-TUL]

yeah, i did one for my jedi belt like that.

i went to wally world and grabbed a 100# p-icture hanger. drilled out the mount holes just a bit, for a p-op rivot. then p-op rivieted it to the belt.

works real well too.