PDA

View Full Version : Newbie question...


Telgarian
08-31-2015, 10:32 AM
Is it possible to use the PLI (Power Level Indicator) and the Crystal Focus 7.5 together?
Silver Serpent
08-31-2015, 10:42 AM
Yes. The PLI can be used with most setups, as it typically gets wired to the battery directly.

If you want to use the CF PLI mode for the accent leds, then it's not going to wire up without some (fairly extensive) modifications.
Telgarian
08-31-2015, 10:44 AM
So I can use the PLI with the CF and use the CF accent led points to run say a few leds to an exposed crystal chamber for example?
Forgetful Jedi Knight
08-31-2015, 02:13 PM
So I can use the PLI with the CF and use the CF accent led points to run say a few leds to an exposed crystal chamber for example?

That is correct.
Telgarian
09-01-2015, 06:37 AM
that is correct.


woohoo!
Telgarian
09-20-2015, 05:54 AM
Okay. Another newbie question.

If I am wanting to use a Tri or Quad Cree LED with the Crystal Focus 7.5 and have truly customised colour mixes for my blade settings do I also need to install the Colour Extender?
ColdVizjerei
09-20-2015, 07:50 AM
Correct. You'll want a Color Extender if you want to have better color mixing
Forgetful Jedi Knight
09-20-2015, 08:09 AM
Okay. Another newbie question.

If I am wanting to use a Tri or Quad Cree LED with the Crystal Focus 7.5 and have truly customised colour mixes for my blade settings do I also need to install the Colour Extender?

It's recommended, but not "required". Personally, I try to use it whenever possible, because it does blend the colors a bit better.