PDA

View Full Version : NB v2 dead?



nicr08
07-11-2015, 07:32 PM
I used a wiring harness with a NB v2 (pex, momentary AV switch, tri-rebel). When I inserted the battery, the switch LED lit up and I could hear white noise in the speaker. Nothing else works. I had a second NB v2 with a wiring harness, swapped out the two sound cards and the saber fired up just fine.

Where should I begin to trouble-shoot the first NB v2?

DarthFender
07-17-2015, 11:48 PM
Swap the boards back, but use the Micro SD card from the working one. If it works, your problem is likely a config issue.