PDA

View Full Version : Ultrasaber upgrade help


Duke XC
06-26-2015, 01:56 PM
So I want to convert two of my Ultrasabers stunt sabers and add sound to them any ways I have been doing some research and I have a couple questions. First is that I know they press fit their latching switches into their sabers and the soundboard I will be using is the hasbro econo board so I want to use a 16mm momentary switch. I know I need to drill out the switch hole but my question is how much do i need to drill it out? Does anyone what drill bit I would need ? My second question is that I was curious about their V4 lines I was wondering if their "stock" sound pommels fit the standard TCSS pommel C clip and insert combination. Thank you for your help :)
Cire Yeldarb
06-26-2015, 03:02 PM
http://forums.thecustomsabershop.com/showthread.php?11154-Commonly-used-Drill-bits-taps-and-measurements
Duke XC
07-04-2015, 07:50 PM
Okay awesome thank you very much !!!
Cire Yeldarb
07-06-2015, 09:52 AM
Anytime :)
JD8a27
07-09-2015, 12:34 AM
May I ask, which hasbro sound board will you be using? And if you have a diagram of the finished work? I currently have one sitting but too timid to use it in a build. I don't want to fry it along with my momentary LED switch.
Duke XC
08-29-2015, 11:33 PM
Sorry for the late reply unfortunately life got in the way, anyways the diagram I used came from here I used diagram posted here http://forums.thecustomsabershop.com/showthread.php?8589-Cheapy-Hasbro-Wiring-Diagrams by lord maul that was credited to Flyerfly. Also I just recently wired up the saber, the led I used is an old Seoul P4 led but the led appears to be dim is this normal or did I do something wrong?
Miraluka
08-30-2015, 01:16 AM
Sorry for the late reply unfortunately life got in the way, anyways the diagram I used came from here I used diagram posted here http://forums.thecustomsabershop.com/showthread.php?8589-Cheapy-Hasbro-Wiring-Diagrams by lord maul that was credited to Flyerfly. Also I just recently wired up the saber, the led I used is an old Seoul P4 led but the led appears to be dim is this normal or did I do something wrong?

Are you using fresh/freshly charged batteries?
Duke XC
08-30-2015, 01:59 PM
Yes I am using brand new batteries Ill go buy new batteries later today though and see if the fixes my problem