PDA

View Full Version : Pc 3.5 led issue


XarovitRost
06-11-2015, 05:17 PM
First off long time lurker first time posting. I have done some mr upgrades to led but this is my first total custom build. I have everything wired up and will post I video but my main led only lights up when aux is pushed and clash sounds. I have been on the forums for three days trying to figure it out. I read the pc manual through all morning today but I don't see what I'm missing.
Cire Yeldarb
06-11-2015, 05:24 PM
Well I mean it sounds like the LED is acting as a FoC die would...

I would suggest uploading some pictures of your wiring for everyone to see, to get a few more pair of eyes on things.
Forgetful Jedi Knight
06-11-2015, 05:29 PM
Carefully review your override config file on the SD card. That usually tends to be the culprit.
XarovitRost
06-11-2015, 05:41 PM
1 of: Petit Crouton Sound Module V3.5
1 of: 7.4v Li-ion 800mAh 14500 Battery Pack
1 of: MHS speaker mount V4 - For 28mm Speakers
1 of: Premium 28mm Speaker
1 of: MWS Recharge Port
1 of: Luxeon Tri-Rebel Star (RBlue/RBlue/White)
2 of: SPST Momentary tactile switch

this is everything i am using im uploading a video right now and will check config files too thank you
XarovitRost
06-11-2015, 05:45 PM
https://www.youtube.com/watch?v=tInSHAJRJ_E
Forgetful Jedi Knight
06-11-2015, 05:48 PM
Side issue: Your exposed wire leads going to the board are WAAAAAYYYYYY too long. they should be around 1/16"-1/8" in length TOPS.
XarovitRost
06-11-2015, 05:48 PM
also my wife has hidden our sd adapter so i have to wait for her to get home from work to check my config files
Noyl Wendor
06-11-2015, 06:08 PM
Howdy,
I had the very same issue, as I went through my SD card I had to tweak the parameters in the override file as well. I basically wiped down everything below the color profiles in the override, and worked on each config file in each bank. Here's a link to what I was working on and some good hints and ideas from other forum members.
http://forums.thecustomsabershop.com/showthread.php?17899-I-think-my-PC-3-5-is-not-right
XarovitRost
06-11-2015, 07:30 PM
thank you
XarovitRost
06-11-2015, 07:31 PM
yea i know i was just test soldering stuff right now and then redo it full on after. luckily i did because i was be super md if i had wired it full on and then this happened lol
XarovitRost
06-13-2015, 03:53 AM
awesome worked perfect thank you guys very much. i will be posting a ‘build’ post in a bit after i finish it up.