View Full Version : Wiring check for a PC 3.5, recharge port, and a G/G/W LED
moonpopper87
05-15-2015, 08:17 PM
Hello all!
After a few months of research, I believe that I am ready to build my first saber! Please take a look at my wiring diagrams and let me know if they are correct! :D
http://i.imgur.com/rJB7QeP.jpg
http://i.imgur.com/aWxpga1.jpg
Silver Serpent
05-16-2015, 08:17 AM
You've got the LED star wired incorrectly. Each die is controlled by the +/- tabs adjacent to that particular die.
The rest of the wiring looks ok to me.
moonpopper87
05-16-2015, 10:33 PM
You've got the LED star wired incorrectly. Each die is controlled by the +/- tabs adjacent to that particular die.
The rest of the wiring looks ok to me.
Ohh, ok. Thanks so much!
The DynaOhm also has specific posts in addition to putting it on the Positive(+) side of the switch LED. The "IN" post needs to attach to the power source and the "OUT" post needs to attach to the switch LED+ terminal.
moonpopper87
05-18-2015, 06:23 PM
The DynaOhm also has specific posts in addition to putting it on the Positive(+) side of the switch LED. The "IN" post needs to attach to the power source and the "OUT" post needs to attach to the switch LED+ terminal.
Thanks!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.