Stunt to SFX upgrade

[femonk]

Ok, upgrading my Vow of Poverty saber to... I don't have a name for it, yet.

NB 2.0 with harness
MWS short momentary 16mm AV switch (the accent LED will be dead until a future upgrade)
Li-Ion 18650 Battery module
MWS Recharge port
Li_Ion charger
2W 28mm Bass Speaker
2.2 ohm 5 W Resistor
Red Rebel Star LED (2.4 v @ 700mA)

I'm mostly concerned with the 2.2 ohm resistor but my hand calculations and an online calculator point to that being ok.
This look to be ok to you guys?

[Silver Serpent]

That resistor will work, as will the 2 ohm 1 watt resistor.

I'd go ahead and grab the DynaOhm resistor for your accent LED in the switch. It'll save you shipping costs when you're ready to upgrade the saber switch with light.

[femonk]

Sweet! Thanks!