Xenomorph almost completed!

[Arashi LV426]

Hello, for over a year I ordered the parts of my first saber and for many months I have not had time to work (besides trying to understand a lot of the concept for the realization with Google translator, and I sincerely thank all the members of that forum helped me !!). This is the project.

11074


Then a video that I enjoyed yesterday create in minutes with some photos taken until now.


https://www.youtube.com/watch?v=tKCHP6W3T6Q&feature=youtu.be

[Obi1]

Bon Giorno Don Arashi!

That will be a great looking saber once put together.
Only Thing I'm wondering about is how you will fit the 2 quite large swicthes, according to the sketch, they are at the same Position you have the PC... ?

[Arashi LV426]

Buon giorno Obi1!;) In fact you are right: according to the plan it would seem that the buttons are touching the card. It is actually aproximate, the board is located rearward toward the specker. Remain approximately 4 cm away. But the problem is that I wanted to complicate life: between the two buttons, but laterally to their axis, I drilled the handle to insert two accent LEDs!:shock::D