runkrod
03-14-2015, 05:12 PM
Hey gang,
Have had a saber with PC 3.5 working for a few months but today after unplugging from recharger, I have no sound. All LEDS and FOC is working, but no sound. Checked board and found no changes to my wiring or soldering. Voltmeter shows no power going to speaker when tested at board connections. SD card is in place properly. Don't think I could've muted it because I don't have an aux switch wired up.
I've only found one other mention of this kind of problem on the forums but there was no resolution post...
Any ideas?
Have had a saber with PC 3.5 working for a few months but today after unplugging from recharger, I have no sound. All LEDS and FOC is working, but no sound. Checked board and found no changes to my wiring or soldering. Voltmeter shows no power going to speaker when tested at board connections. SD card is in place properly. Don't think I could've muted it because I don't have an aux switch wired up.
I've only found one other mention of this kind of problem on the forums but there was no resolution post...
Any ideas?