Final check, grateful for some more experienced eyes.

[San Tala]

Just wondering if I'm missing anything or if anyone sees any problems with this. I know it's a very tight fit bit I think things should fit alright with some cram-fu. Also I'm in Europe so can't order the battery from the store but I may be able to get one from JQSabers, if so I will be ordering my blade from them too. Anyway here's the design and the parts list.

10815

10816

Parts list: http://i.imgur.com/U6oz4BP.png


I was thinking I could have the battery connect to the rest of the wiring with a jst connector so I can remove it and charge with this: http://www.thecustomsabershop.com/37V-148V-Li-Ion-Smart-charger-P129.aspx

[Silver Serpent]

Nothing strikes me as missing. Looks good.

[Sarich]

If you are gonna use the long switch, you will need a switch bezel. Add one of those or swap over to a short switch with the converter.

[San Tala]

Oh thanks for that, I took the bezel I had out of my list to switch it with a different colour then forgot to put it back in. Life saver!