NB - No Sound: Suggestions?

[hapki]

I re-wired my first build to make the wiring neater and to build a better chassis. Now, with the re-worked electronics, I have no sound. Everything else seems to work fine. I re-re-wired the speaker connections just to make sure there wasn't a problem there, but that resolved nothing. I do hear a very faint noise from the speaker, and there's a slight pop when I pull out the kill key. I'm thinking either there's a problem with the configuration files or the NB is fried. I checked the volume controls in the soundboard files, and they are set at 4. I wonder if I could wipe the disk and start again. If so, is there a place where I can download the original files and start clean? If that doesn't work, what else should I try? Thanks in advance for any suggestions you have.

[Ty_Bomber]

Download the default config here:

http://www.plecterlabs.com/catalog/article_info.php?articles_id=107

Reformat the card and see if that helps. Sounds more like a dead speaker to me. Do the lights still come on?

[hapki]

The lights still come on--both the main LED and the switch light on the anti-vandal activation switch. I wiped the disc and tried again. Still only a little bit of sound. I also tried a different speaker, but with the same result. I wonder if the battery is weak? I tried a different battery and still no sound, but there's a chance both batteries need recharging. I'll let one charge and see if that changes anything. I'm open to other suggestions as well. Thanks.

[hapki]

It wasn't the battery. I'm sending the NB back for repairs. I think I abused it a little too much as I learned the ropes of saber smithing.