View Full Version : ANH Blue from C/C/RB

12-13-2014, 02:23 PM
Cyan/cyan/royal blue Luxeon tri-rebel on a 20mm star.
Royal blue and 1x cyan driven by the 4.5V Anakin ROTS board (2005) and the third cyan driven by a 700mA constant current circuit in parallel with the sound board, both wired to a DPST slide switch. 10668

YoRn Mangers
12-14-2014, 05:02 PM
Pretty... :)

12-14-2014, 06:23 PM
Nice of you to say so. Thanks!

09-12-2015, 04:46 PM
Did you put any resistors on this to get the color you wanted other than resisting the initial + out of the luexon

09-12-2015, 07:16 PM
No, the MR board puts out about 900mA of constant current, and I used a constant current driver (think low voltage buck puck) on the third LED in place of a resistor.