LordRazor
12-11-2014, 04:52 PM
Ok first off i have been rummaging through the forums like a mole through my back yard and i have learned a lot of things that are very helpful and some that are best left where i found them. I have assembled a parts list and a wish list for adding sound and FOC at a later date as but i think i have every thing i need and a few things for the 2.0 and 3.0 versions of my planed build 10660 i was hoping to do something like this i took it off of someone who i thought had my thought process and i was tracking with them.
parts list
1 of: Double ended male threaded connector style 1
1 of: Hilt Style 5 (7" Fluted double female threaded connector)
1 of: Machine Standard style switch hole 1.5" from end
1 of: MHS choke style 1
1 of: MHSV1 Blade Holder Style 25
1 of: MHS Heat Sink V3
1 of: MPS Pommel style 4
1 of: 3" Fluted double female threaded connector
1 of: 7.4v Li-ion 1050mAh 14650 Battery Pack
1 of: 2.1mm Power Jack
1 of: Activation box style 5 (might use this on a difrent build)
1 of: 3/4" D-Ring
10 of: Grip Style 2
1 of: Red LED indicator
1 of: Luxeon Tri-Rebel Star (RBlue/RBlue/White)
1 of: Luxeon 18deg Tri-Rebel Star Lens
1 of: BuckPuck 1000mA 6-wire
1 of: Star thermal tape pad
1 of: Green LED indicator
1 of: 8-32 x 1/2" thumb screw
1 of: 16mm Anti Vandal Latching Red Ring Switch
4 of: 26 gauge wire (sold by the foot) (Black)
4 of: 26 gauge wire (sold by the foot) (Red)
4 of: 26 gauge wire (sold by the foot) (White)
1 of: Kill plug style 5 (None)
1 of: MPS Clip
1 of: MPS Insert style 6
1 of: Rebel Star LED & MHS Heatsink Module
1 of: BuckPuck 1000mA 4-wire
4 of: 20mA DynaOhm? Variable Resistor
1 of: LED "Corbin style" Battle blade 1" OD (36 inches)
i want to add a; PLI (Power Level Indicator), Petit Crouton Sound Module V3.5, Petit Crouton V3 Color Xtender, and RICE
is there anything else i will need and if so plese hook me up with links and links to wiring diagrams or y-tube. i learn best by doing not reading or watching.
10662
Manny thinks lord razor
parts list
1 of: Double ended male threaded connector style 1
1 of: Hilt Style 5 (7" Fluted double female threaded connector)
1 of: Machine Standard style switch hole 1.5" from end
1 of: MHS choke style 1
1 of: MHSV1 Blade Holder Style 25
1 of: MHS Heat Sink V3
1 of: MPS Pommel style 4
1 of: 3" Fluted double female threaded connector
1 of: 7.4v Li-ion 1050mAh 14650 Battery Pack
1 of: 2.1mm Power Jack
1 of: Activation box style 5 (might use this on a difrent build)
1 of: 3/4" D-Ring
10 of: Grip Style 2
1 of: Red LED indicator
1 of: Luxeon Tri-Rebel Star (RBlue/RBlue/White)
1 of: Luxeon 18deg Tri-Rebel Star Lens
1 of: BuckPuck 1000mA 6-wire
1 of: Star thermal tape pad
1 of: Green LED indicator
1 of: 8-32 x 1/2" thumb screw
1 of: 16mm Anti Vandal Latching Red Ring Switch
4 of: 26 gauge wire (sold by the foot) (Black)
4 of: 26 gauge wire (sold by the foot) (Red)
4 of: 26 gauge wire (sold by the foot) (White)
1 of: Kill plug style 5 (None)
1 of: MPS Clip
1 of: MPS Insert style 6
1 of: Rebel Star LED & MHS Heatsink Module
1 of: BuckPuck 1000mA 4-wire
4 of: 20mA DynaOhm? Variable Resistor
1 of: LED "Corbin style" Battle blade 1" OD (36 inches)
i want to add a; PLI (Power Level Indicator), Petit Crouton Sound Module V3.5, Petit Crouton V3 Color Xtender, and RICE
is there anything else i will need and if so plese hook me up with links and links to wiring diagrams or y-tube. i learn best by doing not reading or watching.
10662
Manny thinks lord razor