16mm Switch?

[Yorginsnarff]

Hello, Forums (once again!)

I have wired a 12mm switch before, but I am now looking at a 16mm. I am wondering how to wire it? I know the LED terminals are positive and negative, but where would my yellow wires on the nano biscotte (v2) go?

[Yorginsnarff]

NEVERMIND! Lol I found the short version ;3

[Silver Serpent]

Depends on the switch. There are two types of 16mm illuminated switches in the store. There are the 4-post ones like this: http://www.thecustomsabershop.com/16mm-Anti-Vandal-Short-Momentary-Blue-Ring-Switch-P616.aspx and the DPDT ones with 8 posts like this: http://www.thecustomsabershop.com/16mm-Anti-Vandal-Latching-Red-Ring-Switch-P413.aspx

For the 4-post version, just connect the yellow wires to the two non-LED posts.

For the 8-post version, connect one yellow wire to C1, and the other yellow wire to NO1.

Wire the switch LEDs as normal.