View Full Version : 16mm Switch?
Yorginsnarff
11-25-2014, 11:57 AM
Hello, Forums (once again!)
I have wired a 12mm switch before, but I am now looking at a 16mm. I am wondering how to wire it? I know the LED terminals are positive and negative, but where would my yellow wires on the nano biscotte (v2) go?
Yorginsnarff
11-25-2014, 11:59 AM
NEVERMIND! Lol I found the short version ;3
Silver Serpent
11-25-2014, 12:03 PM
Depends on the switch. There are two types of 16mm illuminated switches in the store. There are the 4-post ones like this: http://www.thecustomsabershop.com/16mm-Anti-Vandal-Short-Momentary-Blue-Ring-Switch-P616.aspx and the DPDT ones with 8 posts like this: http://www.thecustomsabershop.com/16mm-Anti-Vandal-Latching-Red-Ring-Switch-P413.aspx
For the 4-post version, just connect the yellow wires to the two non-LED posts.
For the 8-post version, connect one yellow wire to C1, and the other yellow wire to NO1.
Wire the switch LEDs as normal.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.