PDA

View Full Version : Saber item list



informalmyx
12-17-2005, 09:08 PM
ok minus the hilt tube and end cap for the tube what would i need to make the hilt. i want the parts from Master Strydur

<center>http://home.earthlink.net/~myxmyth/infomyx.jpg
"Many claim to have found serenity, and through serenity to have overcome anger. Such arrogance is astounding."</center>

informalmyx
12-17-2005, 09:09 PM
oh and is there anything i need to buy else where i got the tools and ire and such

<center>http://home.earthlink.net/~myxmyth/infomyx.jpg
"Many claim to have found serenity, and through serenity to have overcome anger. Such arrogance is astounding."</center>

Jedi Ranger
12-17-2005, 09:14 PM
Well, I have not built one yet, but my parts are on the way.

- 1x polyC 1" OD blade
- 1x inner blade diffuser
- 1x 1" 1/2-round acrylic tip
- 1x 1" emitter
- 1x switch
- 1x LED Lux III
- 1x 2.2 ohm, 5 watt resistor
- 1x LED lens (your choice of 5 or 10deg)
- 1x LED/lens mount
- battery holder of some kind (modular hilt system fits 4AAA) + batteries
- grip material of your choice (Tim sells classic "t-grips" )
- optional: d-ring OR covertec clip
*NOTE: one thing I just thought of, and have emailed Tim about: the emitter will need a threaded screw to hold the blade in. I'm not sure whether the MHS LED emitters have this or not.

*********************************
http://www.members.shaw.ca/Dahak/

Strydur
12-18-2005, 01:15 AM
The blade holder screw is the only thing I leave for you all to do. Some people like them on the top..some on the bottom etc.. Also it would have been a pain to figure out where to drill the hole before you screw the emitter to the hilt. Maybe I will offer this as a service.

Tim
The Custom Saber Shop

drborden
12-18-2005, 08:12 AM
Tim,

Will the blade holder for the MHS still work with the sink tube hilt? If not when will you be getting more of the other type blade holders if you are getting anymore?

Doug

Doug Borden
www.DRBphotography.com

Strydur
12-18-2005, 11:36 AM
What I will be doing is getting a adapter that makes the MHS emitter and end caps work with 1.5" sink tubes.

Tim
The Custom Saber Shop

drborden
12-18-2005, 12:59 PM
Thanks Tim do you have an ETA on the adapters?

Doug Borden
www.DRBphotography.com

Strydur
12-18-2005, 03:00 PM
It will be middle of january I think.

Tim
The Custom Saber Shop

Zasha
12-22-2005, 03:32 PM
What is the difference between the 5 and 10 degree LED lens? I know basically what they do, but I need a visual image. Could someone take a picture of them next to each other?

xwingband
12-22-2005, 04:06 PM
There is virtually no difference in them.

THESE ARE NOT MY PICS. ALL CREDIT SHOULD BE GIVEN TO CORBIN DAS.
http://server2.uploadit.org/files/corbinspics6-alldegrees.JPG
http://server2.uploadit.org/files/corbinspics6-xray1.jpg

Link to where it was originally posted on ASAP:
http://p082.ezboard.com/fpropreplicasfrm73.showMessageRange?topicID=398.to pic&start=301&stop=320

<center>http://www.dewbackwing.com/dewbacks/files/pinupbanner.jpg
www.dewbackwing.com</center>

Zasha
12-24-2005, 09:02 PM
thanks, the 6 or 10 deg look pretty good, but there is basically no difference between them.