Doubts about itens and customization

[EKowalski]

hello everyone i read rules and various topics, I already have a list of items to buy, but I have many many questions, and would like your help if possible, below is a list of items and images that already designed.

http://www.thecustomsabershop.com/MPS-Pommel-style-7-P386.aspx
http://www.thecustomsabershop.com/Hilt-Style-5-7-Fluted-double-female-threaded-connector-P406.aspx
http://www.thecustomsabershop.com/75-Male-Female-extension-P776.aspx
http://www.thecustomsabershop.com/Screw-on-LED-blade-holder-style-17-P417.aspx
http://www.thecustomsabershop.com/74v-Li-ion-14650-1050mAh-Battery-Pack-P759.aspx
http://www.thecustomsabershop.com/8-32-x-12-thumb-screw - P111.aspx

and have a second option over these 2 items
http://www.thecustomsabershop.com/Double-ended-male-threaded-connector-P127.aspx
http://www.thecustomsabershop.com/3-Fluted-double-female-threaded-connector - P402.aspx

I took two prints to catch the ruler displayed in the saber builder
my doubts, what would be the size of two bases in question?

http://i.imgur.com/9RNsiuo.png
http://i.imgur.com/1my0FMp.png


what is the difference between the pipe and the finished blades?
tube:
http://www.thecustomsabershop.com/1-Thick-walled-Polycarbonate-40-long-P150.aspx
blades:
http://www.thecustomsabershop.com/LED-TCSS-style-Battle-blade-1-OD-P155.aspx
http://www.thecustomsabershop.com/LED-Corbin-style-Battle-blade-1-OD-P198.aspx

I see missing items, the button on / off
a suggested led in the basic option, no longer available, which would be led to put? I want a good, strong blue LED

and about the sound, I want to do with the sounds too, would suggest me the plates, adapters and sensors, to put sound in saber?

holes for attaching buttons, among other details in saber, these holes all I have to do the parts I buy? or you already refer it to the holes?

and finally, before all you want to do, the pieces for mounting the cable / cradle are sufficient, or do I have to put some larger adapter? for cable / cradle is more big?

sorry my english mistakes
i wait, thank you guys.: Roll:

[TheDarkPhoenix]

The ruler down the bottom of the images is in inches, so the first saber would be 11 inches and the second would be approximately 13.5 inches long.


what is the difference between the pipe and the finished blades?
tube:
http://www.thecustomsabershop.com/1-...long-P150.aspx
blades:
http://www.thecustomsabershop.com/LE...1-OD-P155.aspx
http://www.thecustomsabershop.com/LE...1-OD-P198.aspx

The Pipe does not have any of the internals of the complete blades. The complete blades are for people who don't necessarily want to add anything else into the blade like cellophane or reflectors I think.


which would be led to put? I want a good, strong blue LED

The rebel star heatsink module in the blue colour would be perfect for a first time: http://www.thecustomsabershop.com/Rebel-Star-LED-MHS-Heatsink-Module-P653.aspx

For sound, I would suggest a nano biscotte (http://www.thecustomsabershop.com/Nano-Biscotte-Sound-Module-V2-P806.aspx). It's a good first time sound card. I recommend using this speaker holder (http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx) with this speaker (http://www.thecustomsabershop.com/Premium-28mm-Speaker-P77.aspx) and either of these batteries: Trustfire (http://www.thecustomsabershop.com/TrustFire-Protected-37V-2400mAh-18650-Lithium-Battery-2-pack-P517.aspx), Panasonic (http://www.thecustomsabershop.com/Panasonic-Protected-18650-37V-3400mAh-P855.aspx)

[EKowalski]

sorry for the delay in response, I got a bit of work and have to leave again hehe
really appreciate the help.
I could take a closer look at all the articles on the site.

is the first saber want to do the most complete possible, because I do not how to build several lightsabers, so I'll spend to make a more complete what I get.

I'll start with more doubts hehe

about the size, with the first 11 inches is approximately 27 cm, and the second with 13.5 inches is 34.29 centimeters about, right?

before all I want to do, the saber 27 cm would suffice me?

*
The Pipe does not have any of the internals of the complete blades. The complete blades are for people who do not Necessarily want to add anything else into the blade like cellophane or reflectors I think.
did not quite understand about the blades, in my case, what would be better? to make a lightsaber fight, with a good light, and with the sounds and sensors?

This item is unavailable
The rebel star heatsink module in the blue color would be perfect for the first time: http://www.thecustomsabershop.com/Re...dule-P653.aspx
so selected these here to light:
(what items are most needed to make the led?)
http://www.thecustomsabershop.com/JST-Male-connector-26AWG-Green-P952.aspx
http://www.thecustomsabershop.com/JST-Female-connector-26AWG-Yellow-P955.aspx
http://www.thecustomsabershop.com/JST-Extension-BlueWhite-24-AWG-P950.aspx
http://www.thecustomsabershop.com/Luxeon-Rebel-Lens-Holder-P536.aspx
http://www.thecustomsabershop.com/Star-thermal-tape-pad-P483.aspx
http://www.thecustomsabershop.com/Luxeon-Rebel-Star-P523.aspx

i see this topic but not find others part i need for make a full led for saber
http://forums.thecustomsabershop.com/showthread.php?8537-MHS-LED-kit-tutorial-(resistor-variant)

for the sound I selected this board, I believe she can do with a very complete saber, with basically all sounds saber:
(what is selected enough?)
http://www.thecustomsabershop.com/Petit-Crouton-Sound-Module-V3-P893.aspx
http://www.thecustomsabershop.com/TrustFire-Protected-37V-2400mAh-18650-Lithium-Battery-2-pack-P517.aspx

these 2 speakers
(can use 2?)
http://www.thecustomsabershop.com/2W-28mm-Bass Speaker-P662.aspx
http://www.thecustomsabershop.com/2w-20mm-Speaker-P837.aspx

and the support that has been suggested
(can this be supported?)
http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx

button to turn on / off
(I'm in doubt between the two)
http://www.thecustomsabershop.com/12mm-Anti-Vandal-Momentary-Blue-Ring-Switch-P921.aspx
http://www.thecustomsabershop.com/12mm-Anti-Vandal-Momentary-Blue-Ring-Switch-P925.aspx

and a support to make a detail button
(not sure if I am correct in this item)
http://www.thecustomsabershop.com/12mm-Anti-Vandal-Momentary-Blue-Ring-Switch-P925.aspx

indicator light saber connected
(only one further detail)
http://www.thecustomsabershop.com/Green-LED-indicator-P495.aspx


I see I'm missing select items for the saber, what else is missing me to make it quite complete?

wait, thank you.

[EKowalski]

maybe i post it on wrong place, iff need, can move it for me, tank's