Wiring diagram check for PC with CEx and R.I.C.E

[cvsickle]

I got my soundcard today! PCv3. I don't have anything else at the moment, but I was still excited enough to start thinking about wiring. Would anyone care to look at my diagram and see if I'm headed in the right direction? The activation switch's ring should always be on.

10283

[cvsickle]

Not sure why that posted so small. Here's the URL.
http://i1288.photobucket.com/albums/b489/vansicklecorey/Rev0_zps5140bf02.png

[Forgetful Jedi Knight]

Looks good. The only change you need to make is the RICE ground should go to the battery ground lug of the recharge port.

[cvsickle]

That's right... I forgot about that when I drew it. Thanks!

[cvsickle]

I've modified my diagram. The RICE ground should now be wired correctly. Also, I've added a PLI. I can't find anything on how to wire this, so if you could confirm that this is correct or point me in the right direction, I'd appreciate it. I'm thinking that wiring it like this will only let it be on when the kill key is removed. Also, if it were wired on the other side of the recharge port, would it always be on? I'm not planning on doing this, but I'm curious.

http://i1288.photobucket.com/albums/b489/vansicklecorey/RevA_zpsf54dfceb.png

10284

[cvsickle]

Does anyone know how to wire the PLI? Should it be in parallel as I have drawn in the diagram?

[Forgetful Jedi Knight]

Does anyone know how to wire the PLI? Should it be in parallel as I have drawn in the diagram?

That would be fine.

[cvsickle]

Awesome. Thanks.