View Full Version : Ready to go?
SWEGirl
08-01-2014, 03:56 PM
http://forums.thecustomsabershop.com/attachment.php?attachmentid=10279&d=1406925975
I should have the 2.2ohm 2w resistor but in the shop was only a 2.2ohm 5w! Can I use the 5w one?
Gnar-Gnar Gin
08-01-2014, 04:19 PM
5w will work, It's always ok to go higher on the Watts, but never go lower! the only downside to the 5w is it is a little bigger...
side note, I can't seem to make your image larger so i can't see what your doing...
it may be a good idea to edit the post and add some details like LED type and color, battery, switch, and all the other goodies you are including
SWEGirl
08-01-2014, 04:28 PM
5w will work, It's always ok to go higher on the Watts, but never go lower! the only downside to the 5w is it is a little bigger...
side note, I can't seem to make your image larger so i can't see what your doing...
it may be a good idea to edit the post and add some details like LED type and color, battery, switch, and all the other goodies you are including
Fixed the pic so u should be able to see it now. Thanks for the input on the resistor :)
Forgetful Jedi Knight
08-01-2014, 04:40 PM
You should get yourself a Photobucket account, this way you can post your pictures there and just post the link to them here. This way we'll be able to see what you're doing better. ;)
SWEGirl
08-01-2014, 04:46 PM
You should get yourself a Photobucket account, this way you can post your pictures there and just post the link to them here. This way we'll be able to see what you're doing better. ;)
Ill look in to it Knight :D
Forgetful Jedi Knight
08-01-2014, 04:49 PM
Ill look in to it Knight :D
You can just call me FJK, everyone else does.
SWEGirl
08-02-2014, 10:35 AM
Haha okey :)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.