NB Tri-Rebel resistor check and wiring check.

[Gnar-Gnar Gin]

So this is my first time working with a non-economy board(also first tri-rebel), and pretty excited about the ease at which the NB looks like it will wire together. Im going to be wiring my NB up like the first diagram, but with the tri-rebel and FoC from the second diagram. 2 questions:

My setup:
3.7v battery
b/b/w tri-rebel
b+b wired in parallel
w wired to PEx

1)are my resistors correct?
-2x http://www.thecustomsabershop.com/1ohm-5w-resistor-P12.aspx for the blue die (i've heard rumors that you don't need resistors for 3.4Fv on NB do I even need them? If I do need the resistors can I do one like the diagram? or do two?)
-1x http://www.thecustomsabershop.com/1ohm-2w-resistor-P21.aspx for the FoC white die

2)parallel is the only way to wire for my battery setup, correct?

Thanks for all the help as usual, I love y'all!

[Forgetful Jedi Knight]

1. Yes, you should use resistors. You would need one for each die (two for the two blues). You could use the 1 Ohm, 2W for each of 3 dice. That one would work for blue and white.

2.Correct.