PDA

View Full Version : About to start my first build - NB wiring check



Labtebricol3phile
06-02-2014, 02:31 AM
This is my first build that includes a sound card and a recharge port. If someone could confirm that this is wired up correctly I'd appreciate it! Sorry that the diagram (using the term loosely) is such a hot mess. The only thing I'm a little foggy on is the power xtender wiring. I don't really want to hunt for an SMD resistor and then deal with soldering that. I can just bridge the positives on the board and put a regular resistor inline with the positive for the FoC die, right?

Silver Serpent
06-02-2014, 04:56 AM
Wiring looks fine to me.

You are correct, you can bridge the positives on the FoC pad and use a regular resistor inline. Or you can just ignore the positive pads on the PEX and wire the FoC pos directly (with the resistor inline of course).