View Full Version : Would this be the correct wiring for the nano biscotte v2
bionicmad
05-26-2014, 12:26 PM
10025
Would this be the correct wiring if I was to use the nb header on a v2 of the nano biscotte if it is'nt correct could someone show a diagram under neath. Thank you
Forgetful Jedi Knight
05-26-2014, 01:27 PM
10025
Would this be the correct wiring if I was to use the nb header on a v2 of the nano biscotte if it is'nt correct could someone show a diagram under neath. Thank you
First, Welcome to the Forums.
The diagram you have is wrong. The NB doesn't use a BuckPuck.
Go to this board http://forums.thecustomsabershop.com/forumdisplay.php?46-Nano-Biscotte and look around I'm sure you'll be able to find a diagram you are looking for.
You can also use the wiring diagrams in the manual.
bionicmad
05-26-2014, 01:59 PM
thanks I just wanted to know if the diagram was wrong also it will be running on 6v what kind of resistor would be needed. I chose the buckpuck so that the led would'nt burn out.
Forgetful Jedi Knight
05-26-2014, 02:07 PM
You can't use 6V with a NB board. So it's basically a choice of one or the other - you can use either a BuckPuck (and have no sound) or use a NB without the BuckPuck and have sound. If you want to use a NB your best bet is to get a 3.7V Li-Ion battery locally in the UK.
bionicmad
05-26-2014, 02:10 PM
thank you thats all I needed to know.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.